Abstract:Intergranular stress corrosion cracking (IGSCC) of austenitic iron and nickel base alloys continues to affect the availability of boiling water reactors (BWRs) and represents an important consideration when selecting materials for advanced BWRs. For core internal components, like the core shroud, the issues include the SCC resistance of non-sensitized / L-grade stainless steels and the parametric dependencies of all stainless steels to critical variables like corrosion potential, water purity, sensitization, welding, cold work, etc. The overall objectives of this program are to better understand why L-grade stainless steels are apparently more susceptible to IGSCC in core internal applications than anticipated and to guide recommendations for remedial measures if needed. This study focused on the response of sensitized and non-sensitized stainless steels at high and low corrosion potentials, the influence of cold work and the characterization of strains in weld HAZs. Laboratory crack growth rate measurements have produced intergranular rates faster than expected for annealed stainless steel at high potentials and intergranular rates equivalent to thermally sensitized 304 SS when the annealed 304L is cold worked. An electron back scattered pattern technique shows that up to 10% strain from weld shrinkage exists in the weld HAZ of a 304L vertical core shroud weld. These early findings suggest that the combination of high corrosion potential and cold work may be dominant factors in many instances of core shroud cracking. Data to date fully confirm the effectiveness of NobleChem(TM) technology in lowering the corrosion potential and mitigating cracking.

Role of Zn injection on mitigating stress corrosion cracking initiation of Alloy 182 weld metal in simulated light water reactor environment

Effect of zinc injection on mitigating stress corrosion cracking initiation of structural materials in light water reactor primary water

Effects of Zinc Injection on Stress Corrosion Cracking of Cold Worked Austenitic Stainless Steel in High-Temperature Water Environments

Experimental Investigation of Stress Corrosion Characteristics for 16mnr Steel in Nitrate Solution

Effect of Zn Addition on the Stress Corrosion Cracking of As-Cast BCC Mg-11Li Based Alloys

Effects of Zn injection on the oxide film characteristics of zirconium alloy fuel cladding exposed to high-temperature pressurized water with or without subcooled nucleate boiling

The Effect of Nano-Sized Precipitates on Stress Corrosion Cracking Propagation of Alloy 718 under Constant Loads in PWR Primary Water

Insights into the stress corrosion cracking of solution annealed alloy 690 in simulated pressurized water reactor primary water under dynamic straining

Quantification of SCC mechanisms in austenitic alloys under PWR primary water conditions

Effects of Zn injection on corrosion behavior and crud deposition of FeCrAl fuel cladding under subcooled nuclear boiling condition in high-temperature pressurized water

Stress Corrosion Cracking of 316l Haz for 316l Stainless Steel/Inconel 52m Dissimilar Metal Weld Joint in Simulated Primary Water

Influence of Zn on Oxide Films on Alloy 690 in Borated and Lithiated High Temperature Water

Intergranular Stress Corrosion Cracking Of Unsensitized Stainless Steels In Bwr Environments

Effects of Precipitation on the Stress Corrosion Crack Initiation of Alloy 718 in Simulated Pressurized Water Reactor Primary Environment

Strain Rate Dependence of the Effect of Intergranular Carbides on the Resistance to Stress Corrosion Cracking Initiation of Alloy 690 in Simulated Pwr Primary Water

Some Fundamental Understandings of Zn-injection Water Chemistry on Material Corrosion in Pressurized Water Reactor Primary Circuit

Environmentally Assisted Cracking of Forged 316LN Stainless Steel and Its Weld in High Temperature Water

Electrochemical corrosion behaviour of Alloy 690 in simulated PWR high temperature aqueous environments

Effects of zinc-aluminium injection on corrosion behaviour and semiconductor properties of carbon steel in the PHT system of PHWR

Stress Corrosion Cracking in the Heat Affected Zone of A Stainless Steel 308L-316L Weld Joint in Primary Water

A Novel Test Technique for the Mechanistic Study of Initiation of Environmentally Assisted Cracking on a Ni–30Cr–10Fe Alloy in Simulated Pressurized Water Reactor Primary Water