Abstract:The confinement boundaries of spent nuclear fuel (SNF) canisters are typically fusion welded. Welded microstructures, strain hardening, and residual stresses combined with a chemically aggressive, chloride-rich environment led to concerns that the welded canister may be susceptible to chloride-induced stress corrosion cracking (CISCC). A comprehensive understanding of the modification of stainless steel (SS) metallurgical and mechanical properties by fusion welding could accelerate the predictive analysis of CISCC susceptibility. This paper describes a submerged arc welding (SAW) procedure that was developed and qualified on 12.7 mm (0.5 in.) thick AISI 304/304L SS to produce joints in a way similar to actual SNF canister manufacturing. This procedure has the potential to reduce the production cost and weld CISCC susceptibility by using fewer welding passes and lower heat input than current industrial applications. Global and local mechanical behaviors and properties, as well as residual stress distributions on the welded joint, were studied. The results indicate that hardness values in the fusion zone (FZ) and heat-affected zone (HAZ) are slightly higher than that of the base metal. Strain localization was presented in the HAZ before the tensile stress reached its maximum value, and then it shifted to the FZ. The specimen finally broke in the FZ. High tensile residual stresses exhibited in the FZ and the nearby HAZ suggest the highest CISCC-susceptible spots. The maximum tensile residual stresses were along the welding direction, indicating that if cracks occur, they would be perpendicular to the welding direction. This study involved developing and qualifying a SAW procedure for SNF canister production. The new procedure yielded cost savings (SAW working efficiency increased by about 80%), improved mechanical properties, and presented moderate residual stresses. Analysis revealed that the welded joint's low-stress and high-stress damage assessments may be affected by shifts in the strain localization spot under loading.

Understanding the Mechanism of Stress Corrosion Cracking Resistance in Stainless Steel Welds Subjected to Laser Shock Peening without Coating for Nuclear Canister Applications

Understanding the stress corrosion cracking resistance of laser shock surface patterned austenitic stainless-steel weld joints

Effect of Laser Shock Peening on Stress Corrosion Cracking of TC4/2A14 Dissimilar Metal Friction Stir Welding Joints

Prevention of Stress Corrosion Cracking in Welded Joint of Type 304 Stainless Steel by Laser Peening

Influence of laser peening processing on SCC sensitivity in weld joint of 304 type stainless steel

Influence of Surface Modifications by Laser Shock Processing on the Acid Chloride Stress Corrosion Cracking Susceptibility of AISI 304 Stainless Steel

Chloride-induced stress corrosion cracking in Austenitic steels for SNF storage canisters - Recent understanding and advances in mitigation and repair

Mechanisms of laser non-uniform shock peening on the mechanical properties of SUS 304 stainless steel weld joints

Investigation Of The Influence Of Shot Peening On Stress Corrosion Cracking Of Stainless Steel Welded Joints

Study of Mechanical Properties, Microstructure, and Residual Stresses of AISI 304/304L Stainless Steel Submerged Arc Weld for Spent Fuel Dry Storage Systems

Nanoindentation Investigation of Chloride-Induced Stress Corrosion Crack Propagation in an Austenitic Stainless Steel Weld

Revealing the fretting corrosion mechanisms of laser shock peened cold spray 316 L stainless steel

Chloride-Induced Stress Corrosion Cracking of Friction Stir-Welded 304L Stainless Steel: Effect of Microstructure and Temperature

Effect of Laser Shock Peening on High-Cycle Fatigue Performance of 1Cr18Ni9Ti/GH1140 Weld

Stress corrosion cracking of laser shock processed stainless steel by slow strain rate test

Improvement mechanism in stress corrosion resistance of the X70 pipeline steel in hydrogen sulfide solution by massive laser shock peening treatment

Experimental and numerical investigation on residual stress of 316L SS treated by different laser shock peening parameters

Mitigation of Tensile Residual Stress Induced During Welding with Laser Shock Processing

A micromechanical analysis of intergranular stress corrosion cracking of an irradiated austenitic stainless steel

Analysis of crack tip transformation zone in austenitic stainless steel laser-MIG hybrid welded joint

Effects of Laser Shock Processing on Morphologies and Mechanical Properties of ANSI 304 Stainless Steel Weldments Subjected to Cavitation Erosion