Abstract:Deposition models are being developed with the commercial computational fluid dynamics software STAR-CCM+ to evaluate particulate deposition on spent nuclear fuel (SNF) canisters. The primary particulate of concern is chloride salts, which are dispersed in the atmosphere and then deposited onto the canisters. During dry storage, the primary degradation process is likely to be chloride-induced stress corrosion cracking (CISCC) at the heat-affected zones of the canister welds. It is known that stainless steel canisters are susceptible to CISCC; however, the rate of chloride deposition onto the canisters is poorly known, based on sparse field data from a small number of sites. This paper describes work looking at various approaches to modeling turbulence, such as Reynolds-averaged Navier Stokes (RANS) and large eddy simulation (LES), and its impact on particle flow and deposition within a ventilated SNF storage system. The deposition rate is determined for a vertical canister system and a horizontal canister system. LES has the potential to simulate turbulent flows more accurately versus RANS, but is much more computationally expensive. A k-omega version of the RANS turbulence model was used for this study. The computational efficient RANS steady-state model predicted a similar canister deposition result as the LES simulation for a vertical canister storage system. For a horizontal storage system, the RANS steady-state model predicted more particles depositing on the canister than the LES simulation, providing a conservative estimation for particle deposition. A wall correction factor was added to the RANS model to dampen the turbulence fluctuation normal to a surface that left undamped, leads to the RANS model overpredicting deposition along a surface for smaller particles. This work was done to further development of deposition models that could be used to plan and inform SNF canister aging management programs with predictive models for the timing and occurrence of canister CISCC. This work is part of a larger effort tasked with understanding the likelihood of canister degradation due to CISCC. These models are still under development, and testing is needed for validation. However, these models are being presented now to demonstrate to canister vendors, utilities, regulators, and stakeholders the value of this type of modeling.

Chloride-induced stress corrosion cracking in Austenitic steels for SNF storage canisters - Recent understanding and advances in mitigation and repair

Study of Mechanical Properties, Microstructure, and Residual Stresses of AISI 304/304L Stainless Steel Submerged Arc Weld for Spent Fuel Dry Storage Systems

Nanoindentation Investigation of Chloride-Induced Stress Corrosion Crack Propagation in an Austenitic Stainless Steel Weld

Preliminary Modeling of Chloride Deposition on Spent Nuclear Fuel Canisters in Dry Storage Relevant to Stress Corrosion Cracking

Understanding the Mechanism of Stress Corrosion Cracking Resistance in Stainless Steel Welds Subjected to Laser Shock Peening without Coating for Nuclear Canister Applications

Computation of Particulate Deposition on Dry Storage Canisters

Chloride-Induced Stress Corrosion Cracking of Friction Stir-Welded 304L Stainless Steel: Effect of Microstructure and Temperature

Corrosion in the molten fluoride and chloride salts and materials development for nuclear applications

Understanding the stress corrosion cracking resistance of laser shock surface patterned austenitic stainless-steel weld joints

Design and application of an engineered composite patch toward crack damage mitigation on stainless steel plates

Quantification of SCC mechanisms in austenitic alloys under PWR primary water conditions

Turbulent Particle Flow in Spent Nuclear Fuel Storage Systems

How irradiation promotes intergranular stress corrosion crack initiation

Understanding Stress Corrosion Cracking (SCC), Affecting Variables and Prevention Strategies in Nuclear Power Plants—A Review

A micromechanical analysis of intergranular stress corrosion cracking of an irradiated austenitic stainless steel

Decoupling the roles of grain boundary oxidation and stress in IASCC of neutron-irradiated 304L stainless steel

Wet corrosion of incinerators under chloride deposits: insights from experimental study on stainless steels and nickel-based alloy weldments

On the role of intergranular nanocavities in long-term stress corrosion cracking of Alloy 690

Structural health monitoring of stainless-steel nuclear fuel storage canister using acoustic emission

IASCC of neutron irradiated 316 stainless steel to 125 dpa

Effect of Sulfide and Chloride Ions on Pitting Corrosion of Type 316 Austenitic Stainless Steel in Groundwater Conditions Using Response Surface Methodology