Abstract:The relative motion between two mated parts of machinery always generates heat from friction. The lubricant serves as a medium not only to reduce the friction but also to enhance heat dissipation. In order to contain the lubrication oil, lip seal is a most frequent sealing part used in these applications. This paper aims to study the contact width and contact pressure of the seal lip under the various interference fits between the shaft and seal. The contact force associated with the pressure was used to estimate the generated heat due to friction. Thereby, this frictional heat flux was employed to analyze the temperature distribution within the rubber seal. According to the temperature distribution, the thermal deformation of the seal and the concern of material ageing can be examined. Since the use of a seal with a shaft under allowable dimension tolerance is foreseeable, the fit with different degree of interference was investigated. On the other hand, a simple apparatus to measure the width and pressure on the contact lip zone under different diameters of shaft was designed and fabricated. The contact width and contact pressure were distilled from the press mark of a pressure-sensitive film. The measurements were used to demonstrate the feasibility and accuracy of the proposed set up.

On the sealing mechanism of radial lip seals

Measurement of Oil Film Thickness for Application to Elastomeric Stirling Engine Rod Seals

Misalignment-Induced Micro-Elastohydrodynamic Lubrication in Rotary Lip Seals

Finite Element Analysis of Reciprocating Sealing Component of Radial Single-piston Pump

Modelling rotary lip seals

Investigation of the Effect of Underpressure Between Main and Dust Lip on the Performance of Radial Shaft Seals Under Instationary Shaft Movements

A Mixed Lubrication Model for Lip Seals Based on Deterministic Surface Microdeformation

Simulation and experimentation on the contact width and pressure distribution of lip seals

The effect of aging in oil on the performance of a radial lip seal

A method for the characterization of static elastomeric lip seal deformation

Elastohydrodynamic Lubrication Analysis of a Radial Oil Seal with Hydrodynamic Features

A Mixed Lubrication Theoretical Model and Experimental Verification of Rotary Lip Seals

The Effect of Wear on the Performance of a Rotary Lip Seal

The Effect of Axial Position of Contact Zone on the Performance of Radial Lip Seals with a Texturing Shaft Surface

Lip Contact Stress Analysis of Aircraft Actuator VL Seal

Parameter Analysis of the Radial Lip Seal by Orthogonal Array Method

Influence of oil temperature on the lip seal’s performance

Experimental analysis and preliminary model of non-conventional lip seals

Sealing Performance Evaluation and Structural Optimization for Reducing Leakage Failures of Lip Seal Considering High-Speed Rotation Frictional Heat

The effect of texture on the shaft surface on the sealing performance of radial lip seals

The Non- Linear Contact Finite Element Analysis of Seal Structure on Large Scale Cutting Tube Machine