Abstract:Abstract The cylinder block/valve plate interface is one of the major power loss sources and main failure points in axial piston pumps and motors. Surface micro-texture has been proven to be an effective approach to reduce friction and wear in many tribological applications. In the present paper, the effect of micro-texture on the tribological and lubricating performance of the important cylinder block/valve plate interface is studied experimentally and numerically. The experimental investigation was conducted on a disk-on-disk tribometer with similar geometry, operating speed, material, and working fluid to the cylinder block/valve plate interface in the axial piston pump. The tribological test results confirmed the chevron micro-texture's potential to reduce frictional loss in such lubricating interface. Furthermore, a novel numerical method coupling the dynamic loading, squeeze motion, analytical pressure deformation, mixed friction, and cavitation was proposed to study the lubricating performance of micro-textured valve plate/cylinder block interface. This model was then validated comparing to the tribometer experimental results and was used to study the effect of depths, widths, and distances of chevron micro-textures on the lubrication performance of cylinder block/valve plate interface. The results found that the depth of the chevron micro-textures affected whether the cavitation occurred inside the micro-texture, the width of the chevron micro-texture affected the size of the cavitation area that occurred in the micro-textures, and the chevron micro-texture distance affected the size of the convergence zone where positive pressure generated.

The Effect of Axial Position of Contact Zone on the Performance of Radial Lip Seals with a Texturing Shaft Surface

The effect of texture on the shaft surface on the sealing performance of radial lip seals

Investigations of the Micro Surface Shape for the Gear-Shaft/journal-bearing Interface in Water Hydraulic Internal Gear Pumps

Research on sealing performance of oil seals with micro-dimple texture on lips

A mixed soft elastohydrodynamic lubrication model of textures in a rotary lip seal

Experimental investigation of the effect of typical surface texture patterns on mechanical seal performance

Thermo-elasto-hydrodynamic Analysis of Triangular Textured Mechanical Face Seals

The Effect of Wear on the Performance of a Rotary Lip Seal

Sealing performance and optimization design of squamous textured mechanical seal

Structure Optimization of Lip Seals Based on a Mixed Lubrication Model

Numerical Analysis of the Traction Effect on Reciprocating Seals in the Hydraulic Actuator

A Mixed Lubrication Model for Lip Seals Based on Deterministic Surface Microdeformation

Analytical method for contact characteristics of rubber shaft seals under dynamic eccentricity considering viscous effect

Effect of Surface Texture on Wear Reduction of the Tilting Cylinder and the Valve Plate for a High-Speed Electro-Hydrostatic Actuator Pump

Effect of Rotating Shaft Vibration on Lip Seal Performance

Hydrostatic effect of rectangle micro-texture on liquid-lubricated mechanical seal

Reverse pumping by a shaft with a micro-spiral groove for rotary lip seals

A Mixed Lubrication Theoretical Model and Experimental Verification of Rotary Lip Seals

Numerical simulation and experimental study of shaft pumping by laser structured shafts with rotary lip seals

Parameter Analysis of the Radial Lip Seal by Orthogonal Array Method

Effects of Chevron Micro-Textures on Tribological and Lubricating Performance of Cylinder Block/Valve Plate Interface in Axial Piston Pumps