Abstract:Engineering practice has demonstrated that seal failure can result in severe leakage and wear, reducing the efficiency of hydraulic systems and even leading to major safety risks. Currently, analyses of the thermal aspect of seal interfaces are relatively limited, with most studies focusing on mechanical analysis. However, in actual applications, temperature has a significant impact on sealing performance. In this paper, nonlinear elastomechanics, viscous fluid mechanics, micro-contact mechanics, micro-deformation theory, and thermodynamics are coupled to establish a mixed lubrication model considering the thermal effect. The reliability of the mixed lubrication model is verified through experiments, and the temperature distribution of the oil film in the sealing area and the temperature distribution of the seal ring are simulated. Finally, the effects of the reciprocating speed, root mean square roughness, fluid medium pressure, and seal pre-compression on seal friction force and leakage are investigated. The results show that the heat generated in the sealing area accumulates at the bottom of the V-ring. Under the same conditions, compared with the instroke, the temperature-rise area of the outstroke is biased to the left and the increase in temperature is greater. In addition, the piston rod speed and the preliminary compression of the seal ring have a greater impact on the overall seal friction force and leakage. Under a lower seal pre-compression, the RMS roughness has a great influence on the leakage and friction in the outstroke, while the impact of the internal stroke is limited.

Hydrostatic effect of rectangle micro-texture on liquid-lubricated mechanical seal

Investigations of the Micro Surface Shape for the Gear-Shaft/journal-bearing Interface in Water Hydraulic Internal Gear Pumps

Investigation on sealing gap between ring gear and case in internal gear machines

The effect of texture on the shaft surface on the sealing performance of radial lip seals

Numerical Analysis of the Traction Effect on Reciprocating Seals in the Hydraulic Actuator

The effect of surface roughness on thermal-elasto-hydrodynamic model of contact mechanical seals

Experimental investigation of the effect of typical surface texture patterns on mechanical seal performance

Thermo-elasto-hydrodynamic Analysis of Triangular Textured Mechanical Face Seals

A mixed soft elastohydrodynamic lubrication model of textures in a rotary lip seal

The Effect of Axial Position of Contact Zone on the Performance of Radial Lip Seals with a Texturing Shaft Surface

Mechanical Seal Performance of Rough Surface Influenced by Tilt

Multi-Physical Field, Coupled, Mixed Lubrication Analysis of Hydraulic Reciprocating Vacuum Lip Seal

Numerical Simulation Model of Reciprocating Rod Seal Systems with Axial Wear Texture on Rod Surface

Thermal Cavitation Effect on the Hydrodynamic Performance of Spiral Groove Liquid Face Seals

Research on sealing performance of oil seals with micro-dimple texture on lips

Sealing performance and optimization design of squamous textured mechanical seal

A Mixed Lubrication Model for Lip Seals Based on Deterministic Surface Microdeformation

Contact status between seal ring and its support: crucial factor in hydrostatic mechanical face seal

The Effect of Wear on the Performance of a Rotary Lip Seal

Semi-analytical Fluid-solid Coupling Model for Hydrostatic Mechanical Seals

Study on the Performance of Reciprocating Seals under the Coupling Effect of Elastohydrodynamic Lubrication and Rubber Wear