Abstract:Wide bandgap semiconductors show superior material properties enabling silicon carbide (SiC) metal-oxide-semiconductor field-effect transistors (MOSFETs) present good features on its switching speed and withstand voltage. However, the high voltage and fast switching characteristics of SiC MOSFETs also put forward new requirements for voltage measurement, that is, high bandwidth under high voltage conditions. This article proposes a new voltage divider structure and a proactive parameter design compensation network to build high voltage and high bandwidth voltage sensing circuit. This structure utilizes the characteristics that the same resistor has the same parasitic capacitance to meet the high frequency constraints of the voltage sensing circuit. The influence of parasitic parameters and load parameters on circuit performance is analyzed in detail, which provides a basis for the compensation network design. By combining the proposed voltage sensing circuit with an appropriate proactive parameter design load effect compensation network (PDCN), the withstand voltage rating of the low-voltage and high-bandwidth voltage probes can be extended to required levels. Different from other existing methods, PDCN can actively design the compensation circuit parameters and provide the optimal parameters of the compensation circuit. This lead to a smaller input capacitance than the state of the art commercial voltage probes, which will help to obtain better performance when measuring high-speed switching voltage. The performance of the voltage measurement is experimentally verified and compared by SiC-based double pulse test (DPT) circuits.

Offset compensation for differential charge‐based capacitance measurement

A New Capacitance-to-Frequency Converter for On-Chip Capacitance Measurement and Calibration in CMOS Technology

A New On-chip Signal Generator for Charge-Based Capacitance Measurement Circuit

Considerations and Optimization of Measurement Accuracy of Capacitance in Nano-Scale Cmos Technology

A method to reduce process-related sensitivity in sub-threshold ICs and its circuit implementation

An Effective DC Offset Calibration Method Combined with Analog and Digital Circuits for Direct Conversion Receivers

An Improved Design Method Based on a Multi-Plate Coupler Structure for Capacitive Power Transfer with Wide Ranges of Misalignment and Loads

Gate Capacitance Measurement Using A Self-Differential Charge-Based Capacitance Measurement Method

A Calibration-Free Mismatch-Immune Quadrature-Clocked Voltage-Dependent Capacitance Measurement Method

Interconnect Capacitance Characterization Based on Charge Based Capacitance Measurement (CBCM) Technique for DFM Applications

Fully-Differential Low-Offset Interface For Capacitive Sensors

Compensation for bias in capacitive micro accelerometer

A Fully Integrated Capacitance Boosting Offset Calibration Circuit for Capacitive Pressure Sensor

Full Differential Amplifier for MEMS Micro-Capacitor Detecting

Capacitor Mismatch Auto-Compensation For Mems Gyroscope Differential Capacitive Sensing Circuit

An Offset-Compensated Switched-Capacitor Interface Circuit for Closed-Loop Mems Capacitive Accelerometer

Analysis and Characterization of Capacitance Variation Using Capacitance Measurement Array

A Low-Cost High-Performance Voltage Sensing Circuit with Proactive Parameter Design Compensation Network for SiC MOSFETs.

A Low-Power Area-Efficient Wide-Range Offset Calibration Technique for High-Speed High-Resolution Comparator

Temperature Compensation for Charge Measurement of BESIII TOF Electronics

A High-Linearity Capacitance-to-Digital Converter Suppressing Charge Errors From Bottom-Plate Switches