Abstract:Wide bandgap semiconductors show superior material properties enabling silicon carbide (SiC) metal-oxide-semiconductor field-effect transistors (MOSFETs) present good features on its switching speed and withstand voltage. However, the high voltage and fast switching characteristics of SiC MOSFETs also put forward new requirements for voltage measurement, that is, high bandwidth under high voltage conditions. This article proposes a new voltage divider structure and a proactive parameter design compensation network to build high voltage and high bandwidth voltage sensing circuit. This structure utilizes the characteristics that the same resistor has the same parasitic capacitance to meet the high frequency constraints of the voltage sensing circuit. The influence of parasitic parameters and load parameters on circuit performance is analyzed in detail, which provides a basis for the compensation network design. By combining the proposed voltage sensing circuit with an appropriate proactive parameter design load effect compensation network (PDCN), the withstand voltage rating of the low-voltage and high-bandwidth voltage probes can be extended to required levels. Different from other existing methods, PDCN can actively design the compensation circuit parameters and provide the optimal parameters of the compensation circuit. This lead to a smaller input capacitance than the state of the art commercial voltage probes, which will help to obtain better performance when measuring high-speed switching voltage. The performance of the voltage measurement is experimentally verified and compared by SiC-based double pulse test (DPT) circuits.

A method to reduce process-related sensitivity in sub-threshold ICs and its circuit implementation

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

A Threshold Control Technique for CMOS Comparator Design

A simple approach to modeling substrate coupling in mixed-signal integrated circuits by TCAD

An Improved RF MOSFET Model Accounting Substrate Coupling among Terminals

Bias Current Compensation Method with 41.4% Standard Deviation Reduction to MOSFET Transconductance in CMOS Circuits

A Low-Cost High-Performance Voltage Sensing Circuit with Proactive Parameter Design Compensation Network for SiC MOSFETs.

On-Chip Process Variation Sensor Based on Sub-Threshold Leakage Current with Weak Bias Voltages

Lower-Order Compensation Chain Threshold-Reduction Technique for Multi-Stage Voltage Multipliers

A 1.65‐nW 11.14‐ppm/°C self‐biased subthreshold CMOS voltage reference with temperature compensation circuit

Bulk Bias As an Analog Single-Event Transient Mitigation Technique with Negligible Penalty

A Novel Adaptive Reverse Body Bias Technique to Minimize Standby Leakage Power and Compensate Process and Temperature Variations

A Low Power CMOS Voltage Reference Generator with Temperature and Process Compensation

Process Variation Robust Current-Mode On-Chip Interconnect Signaling Scheme

Novel Bulk Homogenization Field Devices with Reducing Process Difficulty

Process Optimization for a High Gate Trench MOS to Minimize Threshold Voltage Variation

Improved Performance of CMOS Terahertz Detectors by Reducing MOSFET Parasitic Capacitance

A Process Optimization Method for Carrier Stored Trench Bipolar Transistor (CSTBT) Device

Analysis and Mitigation of Variability in Subthreshold Design

A Compensating Technique for RF Performance Degradation of Low Noise Amplifier in Nanoscale CMOS Process

A 48 Pw, 0.34 V, 0.019%/V Line Sensitivity Self-Biased Subthreshold Voltage Reference with DIBL Effect Compensation