Abstract:Wide bandgap semiconductors show superior material properties enabling silicon carbide (SiC) metal-oxide-semiconductor field-effect transistors (MOSFETs) present good features on its switching speed and withstand voltage. However, the high voltage and fast switching characteristics of SiC MOSFETs also put forward new requirements for voltage measurement, that is, high bandwidth under high voltage conditions. This article proposes a new voltage divider structure and a proactive parameter design compensation network to build high voltage and high bandwidth voltage sensing circuit. This structure utilizes the characteristics that the same resistor has the same parasitic capacitance to meet the high frequency constraints of the voltage sensing circuit. The influence of parasitic parameters and load parameters on circuit performance is analyzed in detail, which provides a basis for the compensation network design. By combining the proposed voltage sensing circuit with an appropriate proactive parameter design load effect compensation network (PDCN), the withstand voltage rating of the low-voltage and high-bandwidth voltage probes can be extended to required levels. Different from other existing methods, PDCN can actively design the compensation circuit parameters and provide the optimal parameters of the compensation circuit. This lead to a smaller input capacitance than the state of the art commercial voltage probes, which will help to obtain better performance when measuring high-speed switching voltage. The performance of the voltage measurement is experimentally verified and compared by SiC-based double pulse test (DPT) circuits.

Bias Current Compensation Method with 41.4% Standard Deviation Reduction to MOSFET Transconductance in CMOS Circuits

New Technique: A Low Drift Current Reference Based on PMOS Temperature Correction Technology.

A method to reduce process-related sensitivity in sub-threshold ICs and its circuit implementation

Dynamic Current Balancing for Paralleled SiC MOSFETs with Circuit Mismatches Considering Circulating C Urrent in Drive Circuit

Analysis on Static Current Sharing of N-Paralleled Silicon Carbide MOSFETs

A Low-Cost High-Performance Voltage Sensing Circuit with Proactive Parameter Design Compensation Network for SiC MOSFETs.

Active Gate Driver for Dynamic Current Balancing of Parallel-Connected SiC MOSFETs

Die Current Balancing of a Press-Pack SiC MOSFET

An Impedance Adapting Compensation Scheme for High Current NMOS LDO Design

Factors for Negative Bias Temperature Instability Improvement in Deep Sub-Micron CMOS Technology

Process Variation Robust Current-Mode On-Chip Interconnect Signaling Scheme

A Gate Drive Circuit and Dynamic Voltage Balancing Control Method Suitable for Series-Connected SiC Mosfet S

Bias-independent subthreshold swing in ballistic cold-source field-effect transistors by drain density-of-states engineering

Optimization Method of SiC MOSFET Switching Trajectory Based on Variable Current Drive

Active Gate Drive with Gate-Drain Discharge Compensation for Voltage Balancing in Series-Connected SiC MOSFETs

Some issues in advanced CMOS gate stack performance and reliability

Imbalance Current Analysis and Its Suppression Methodology for Parallel SiC MOSFETs with Aid of a Differential Mode Choke.

Design of On-Chip Compensation Network for Current Program Mode Step-Up PWM Converter

A Novel Digital Compensation Technique for Current Bias Without Additional Power Consumption

A Method to Balance Dynamic Current of Paralleled SiC MOSFETs With Kelvin Connection Based on Response Surface Model and Nonlinear Optimization

Junction Temperature Correction Method for SiC MOSFET Based on Turn-Off Oscillation Frequency of Drain-Source Voltage