Abstract:Wide bandgap semiconductors show superior material properties enabling silicon carbide (SiC) metal-oxide-semiconductor field-effect transistors (MOSFETs) present good features on its switching speed and withstand voltage. However, the high voltage and fast switching characteristics of SiC MOSFETs also put forward new requirements for voltage measurement, that is, high bandwidth under high voltage conditions. This article proposes a new voltage divider structure and a proactive parameter design compensation network to build high voltage and high bandwidth voltage sensing circuit. This structure utilizes the characteristics that the same resistor has the same parasitic capacitance to meet the high frequency constraints of the voltage sensing circuit. The influence of parasitic parameters and load parameters on circuit performance is analyzed in detail, which provides a basis for the compensation network design. By combining the proposed voltage sensing circuit with an appropriate proactive parameter design load effect compensation network (PDCN), the withstand voltage rating of the low-voltage and high-bandwidth voltage probes can be extended to required levels. Different from other existing methods, PDCN can actively design the compensation circuit parameters and provide the optimal parameters of the compensation circuit. This lead to a smaller input capacitance than the state of the art commercial voltage probes, which will help to obtain better performance when measuring high-speed switching voltage. The performance of the voltage measurement is experimentally verified and compared by SiC-based double pulse test (DPT) circuits.

A Calibration-Free Mismatch-Immune Quadrature-Clocked Voltage-Dependent Capacitance Measurement Method

A New Capacitance-to-Frequency Converter for On-Chip Capacitance Measurement and Calibration in CMOS Technology

A New On-chip Signal Generator for Charge-Based Capacitance Measurement Circuit

Considerations and Optimization of Measurement Accuracy of Capacitance in Nano-Scale Cmos Technology

Digital Capacitance Measurement System Based on FPGA

A Frequency-Domain I/Q Imbalance Calibration Algorithm for Wideband Direct Conversion Receivers Using Low-Cost Compensator.

MMIC on-Wafer Test Method Based on Hybrid Balanced and Unbalanced RF Pad Structures

A Bridged Contactless Measurement Technique for LC Tank Based Voltage-Controlled Oscillator.

Gate Capacitance Measurement Using A Self-Differential Charge-Based Capacitance Measurement Method

An Effective DC Offset Calibration Method Combined with Analog and Digital Circuits for Direct Conversion Receivers

A capacitive mismatch calibration method for SAR ADCs based on TDC

A Simple Solder-Free Fixture for Surface Mounted Device Measurement

A Low-Power Area-Efficient Wide-Range Offset Calibration Technique for High-Speed High-Resolution Comparator

A Simple Histogram-Based Capacitor Mismatch Calibration in SAR ADCs

Automatic Measurement of the Equivalent Static Capacitance of Ultrasonic Transducers for Dynamic Matching

Capacitor Mismatch Calibration Method for SAR ADC with Minimum Area and Power Penalty

A Low-Cost High-Performance Voltage Sensing Circuit with Proactive Parameter Design Compensation Network for SiC MOSFETs.

Calibration Method for Electrical Capacitance Tomography Syem and It's Parameters Readjust

Analysis and Characterization of Capacitance Variation Using Capacitance Measurement Array

Capacitor mismatch calibration for SAR ADCs based on comparator metastability detection

A Wide-Range and High-Precision Real-Time Calibration for Dynamic Comparator