Abstract:The equivalent circuit simulation plays an important role in the design of ultrasound transducer. However, the existing methods are difficult to achieve the effect of matching and backing layer, and not able to accurately simulate the transducer with cable. Especially in the application of high frequency ultrasound, the long cable has a great influence on the performance of the transducer. To overcome these limitations, this paper proposed an improved equivalent circuit method, which combined Leach model and transmission line model. It can realize the complete simulation of ultrasound transducer with a long cable, matching layer, and backing layer in PSPICE circuit simulation software when the parameters were measured. Its principles were briefly introduced, and ultrasound transducers with different frequencies (12 and 20 MHz), different matching layers, and different cable lengths (0.5–2.5 m) were designed and fabricated to verify the effectiveness of the method, which is also compared with the traditional KLM method using PiezoCAD. The experiment results showed that the long cable, matching layer, and backing layer have a significant impact on the performance of high frequency ultrasound transducers, and this proposed method has good agreement with these results. Moreover, for the simulation of the complete transducer, the effect of this method is better than KLM model. Besides, this method does not need to know the specific equivalent circuit of matching, backing layer, or cable wire, it can accurately predict the impedance and phase of the transducer through the material parameters, which is very helpful for the material selection and optimization of subsequent transducer design and fabrication. The study indicates that this improved equivalent circuit method is suitable to be applied in the general circuit simulation software and provides strong support for the high frequency transducer and system design.

Automatic Measurement of the Equivalent Static Capacitance of Ultrasonic Transducers for Dynamic Matching

An Online Impedance Analysis And Matching System For Ultrasonic Transducers

Dynamic Matching Model of Ultrasonic Transducer Based on Digital Inductance.

Two Capacitive Micro-Machined Ultrasonic Transducers for Wind Speed Measurement

A Method Combining Measurement Tool and Numerical Simulation for Calculating Acoustic Signals of Ultrasonic Flowmeter

Study of the Matching Circuits of Piezoelectric Ultrasonic Transducer Based on Matlab

Measurement insights and error analysis of electronic parameters for ultrasonic transducers

Distance Measurement Via Ultrasonic

An Improved Equivalent Circuit Simulation of High Frequency Ultrasound Transducer

Characterizing Ultra-Thin Matching Layers of High-Frequency Ultrasonic Transducer Based on Impedance Matching Principle

Development of a Novel Strategy Based on In-Process Compensation of Charge Leakage for Static Force Measurement by Piezoelectric Force Sensors

An Integrated Dual-Mode Pulse-Echo Ultrasonic Measurement System Under Pulsed/Static Magnetic Field

Investigation of capacitively coupled ultrasonic transducer system for nondestructive evaluation

A novel robustness matching method based on amplitude-frequency characteristic for high power ultrasonic system under variable load

Investigation on Design Theory and Performance Analysis of Vacuum Capacitive Micromachined Ultrasonic Transducer

Application of Air-Coupled Ultrasonic Nondestructive Testing in the Measurement of Elastic Modulus of Materials

On-line Measurement of Electrical Variables of the Transducer During Ultrasonic Welding and Cutting

Research on Broadband Matching Method for Capacitive Micromachined Ultrasonic Transducers Based on PDMS/TiO2 Particles

A PLL-dependent piezoelectric transducer frequency tracking technique based on static capacitance compensation

Reciprocal circuit design to reduce zero error and thermal drift in ultrasonic flow metering

Equivalent Circuit Analysis of CMUTs-based Device for Measurement in Liquid Samples