Abstract:For inspection of mechanical properties and integrity of critical components such as integrated circuits or composite materials by acoustic methodology, it is imperative to evaluate their acoustic reflection coefficients, which are in close correlation with the elastic properties, thickness, density, and attenuation and interface adhesion of these layered structures. An experimental method based on angular spectrum to evaluate the acoustic coefficient as a function of the incident angle, θ, and frequency, ω, is presented with high frequency time-resolved acoustic microscopy. In order to achieve a high spatial resolution for evaluation of thin plates with thicknesses about one or two wavelengths, a point focusing transducer with a nominal center frequency of 25 MHz is adopted. By measuring the V(z, t) data in pulse mode, the reflection coefficient, R(θ, ω), can be reconstructed from its two-dimensional spectrum. It brings simplicity to experimental setup and measurement procedure since only single translation of the transducer in the vertical direction is competent for incident angle and frequency acquisition. It overcomes the disadvantages of the conventional methods requiring the spectroscopy for frequency scanning and/or ultrasonic goniometer for angular scanning. Two substrates of aluminum and Plexiglas and four stainless plates with various thicknesses of 100 μm, 150 μm, 200 μm, and 250 μm were applied. The acoustic reflection coefficients are consistent with the corresponding theoretical calculations. It opened the way of non-destructive methodology to evaluate the elastic and geometrical properties of very thin multi-layers structures simultaneously.

Application of Air-Coupled Ultrasonic Nondestructive Testing in the Measurement of Elastic Modulus of Materials

Thickness Measurement of Composite Material Using Eddy Current Testing

Simultaneous Measurement of Elastic Moduli, Attenuation, Density, and Thickness of a Layer by Ultrasonic Spectroscopy Using Point-Focus Transducer

Measurement of Elastic Constant Matrix of Carbon Fiber Composites With an Ultrasonic 2D-Array Transducer

Inline Measurement of Acoustoelastic Coefficient in Conductive Sheet Material With Electromagnetic Loading System

Viscoelastic Evaluation of Composite Materials by Non-Contact Air Coupled Ultrasonic Transmission Method

Nondestructive characterization of mechanical properties on metallic and polymer plates using hybrid laser-air coupled ultrasonic techniques

Simultaneous Thickness, Velocity, Density, and Attenuation Measurement of a Thin Layer by Time-Resolved Acoustic Microscopy

Angular Measurement of Acoustic Reflection Coefficients by the Inversion of V(z, T) Data with High Frequency Time-Resolved Acoustic Microscopy

Off-epicentral measurement of laser-ultrasonic shear-wave velocity and its application to elastic-moduli evaluation

Remote measurement of material elastic property at elevated temperature with grating laser ultrasonic testing

Research on Welding Residual Stress Measurement Using Electromagnetic Acoustic Transducer

Ultrasonic Measurement of Axial Stress Using High-Frequency Cylindrical Guided Wave

Residual strain measurement based on longitudinal to shear wave velocity ratio with a dual-mode EMAT

Uniaxial stress in-situ measurement using EMAT shear and longitudinal waves: Transducer design and experiments

Simultaneous determination of Young's modulus and Poisson's ratio in metals from a single surface using laser-generated Rayleigh and leaky surface acoustic waves

Measurement of Elastic Constants of Additive Manufactured Ti-6Al-4V by Non-contact Multi-mode Laser Ultrasonic System

Measurement of fiber reinforced composite engineering constants with laser ultrasonic

Non-destructive evaluation of non-uniform stress fields and subsurface stress gradients using ultrasonic waves

The Elastic Characterization of Composite Based on Ultrasonic Waves

Time-multiplexed laser self-mixing sensor for measurement of multiple material elastic moduli