Abstract:Acoustical methods are playing an important role for nondestructive evaluation (NDE) of adhesive-bonded composites and components in industrial applications. A dual-frequency ultrasonic technique is proposed for the quantitative evaluation of contact strength between pressed solid surfaces. An ultrasonic excitation consists of two primary frequency components is applied perpendicular to the interface, and the transmitted wave is examined. Theoretical study is based on a perturbation analysis of contact acoustic nonlinearity (CAN) model, predicting the generation of difference and sum frequency waves, together with the second harmonics. Nonlinear parameters are defined to describe the nonlinearity generation efficiencies. Experiments are performed for three types of interfaces, i. e. the interfaces of two aluminum alloy blocks with and without couplant and two glass blocks. The difference frequency wave component has bigger generation efficiency than other nonlinear components, which offers an advantage of high SNR and good detection capability of contact stiffness (interfacial stiffness). For each interface, the first and second-order interfacial stiffness are measured with contact pressure increasing from near zero to about 0.8 MPa with the aid of a laser interferometer. Finally, numerical simulations are also carried out, and a consistency is found between measurements and calculations. The dual-frequency ultrasound sent to the interface generates at least four second-order nonlinear components, which enriches the CAN technique for interface quality examinations. Both measured and simulated results indicate an increase of interfacial stiffness and decrease of nonlinear parameters with growing contact pressure. Moreover, measured results show that couplant between interfaces influences the contact stiffness evaluations in an enhanced manner, while the contact pressure determined by measured interfacial stiffness values are underestimated due to the couplant. The main problem comes from the contact between the transducersample interfaces, which brings extra nonlinearity to the detected signals and affect the accuracy of measuring. Copyright© (2010) by the International Congress on Acoustics.

Viscoelastic Evaluation of Composite Materials by Non-Contact Air Coupled Ultrasonic Transmission Method

Porosity Test in Carbon Composites Based on a New Ultrasonic Attenuation Method

Pulse-echo Based Ultrasonic Attenuation Model for Porosity Test of Carbon Fiber Composites

Ultrasonic attenuation testing method for NDE of void content based on theoretical model and experiment calibration

Development of Portable Ultrasonic Non-Destructive Test System for Viod Content of Carbon-Fiber Reinforced Plastics

Thickness Measurement of Composite Material Using Eddy Current Testing

The Ultrasonic Evaluation Method for the Porosity of Variable-Thickness Curved CFRP Workpiece: Using a Numerical Wavelet Transform

Application of Air-Coupled Ultrasonic Nondestructive Testing in the Measurement of Elastic Modulus of Materials

Ultrasonic and vibration methods for the characterization of pultruded composites

Specific Features of Nondestructive Testing of Polymer and Composite Materials Using Air-Coupled Ultrasonic Excitation and Laser Vibrometry

Effects of various porosities on the damage evolution behavior of carbon fiber/epoxy composites using acoustic emission and micro-CT

Implementation of the ultrasonic through-transmission technique for the elastic characterization of fiber-reinforced laminated composite

Nondestructive Evaluation of Bond Quality of Adhesively Joined Carbon Fiber/nylon 6 Composites

Study on Porosity and Material Parameters of Hot Moulded Resin Matrix Composites using Nondestructive Laser Ultrasound Technique

Evaluation of contact stiffness between solid-solid interfaces using dual-frequency ultrasound

Manufacturing and mechanical performance of novel epoxy resin matrix carbon fiber reinforced damping composites

Mechanical and Microstructural Assessment of Inhomogeneities in Oxide Ceramic Matrix Composites Detected by Air-Coupled Ultrasound Inspection

Measurement of Elastic Constant Matrix of Carbon Fiber Composites With an Ultrasonic 2D-Array Transducer

Dynamic monitoring of epoxy reactions and modulus evaluation by a multispectral approach

Experimental Study on the Acoustoelastic Effect in Composites Using Ultrasonic Waves

Carbon Fiber Composite Voids and Testing Methods