Abstract:To detect micro defects in thick-section carbon fiber reinforced composite (CFRP) , the recurrence analysis method was used to analyze ultrasonic signals of tested CFRP.First, small holes were made to simulate micro defects, and an ultrasonic pulse echo method was adopted to test these simulated defects of different sizes.Then, the signal segments around the defect position were selected, and recurrence analysis was performed after proper parameters like embedding dimension (m) , time delay (τ) , and threshold (ε) were chosen.The recurrence plots (RPs) of defect-free signals were compared with those of defective ones and, according to the physical meanings of recurrence quantification analysis (RQA) variables, the changes that appeared in RPs were explained.Finally, ultrasonic transducers with different frequencies were evaluated to determine which one has the best perform-ance.The results show that a 7.5 MHz resolution series transducer is the best choice in our experiment, and while m=7, τ=2, andε=2, the defects may cause dark areas, white bands, and longer diagnosis structure in RPs and correspondingly larger RQA variables.More concretely, the ultrasonic signal of defect-free thick-section CFRP appears in a chaotic state, while defects may break this state and lead to another one.The results will lay a foundation for the quantitative identification and classification of real micro defects.

Ultrasonic attenuation testing method for NDE of void content based on theoretical model and experiment calibration

Ultrasonic attenuation model of void contained carbon-fiber reinforced plastics

Porosity Test in Carbon Composites Based on a New Ultrasonic Attenuation Method

Frequency Spectral Analysis for the Ultrasonic Attenuation of Carbon Fiber Reinforced Plastics

Pulse-echo Based Ultrasonic Attenuation Model for Porosity Test of Carbon Fiber Composites

Development of Portable Ultrasonic Non-Destructive Test System for Viod Content of Carbon-Fiber Reinforced Plastics

Portable Ultrasonic Detector Used in Void Content of Carbon-fiber Reinforced Plastics

Cfrp Voids 3d Identification and Location Method Based on the Process of Backscattered Signal

Analysis of Lifting-Scheme-Based Denoising for Void Content Detection in Carbon Fiber Reinforced Plastics

Ultrasonic Inspection Of Localized Defects In Low-Porosity Cfrp

The Ultrasonic Evaluation Method for the Porosity of Variable-Thickness Curved CFRP Workpiece: Using a Numerical Wavelet Transform

Ultrasonic Detection Method of Micro Defects in Thick-Section CFRP

Ultrasonic Pulse-echo Model for Carbon Fiber Reinforced Polymer in Frequency Domain

Carbon Fiber Composite Voids and Testing Methods

Viscoelastic Evaluation of Composite Materials by Non-Contact Air Coupled Ultrasonic Transmission Method

Critical Void Content for Thermoset Composite Laminates

Identification of Localized Void Defects in Composite by Recurrence Quantification Analysis of Ultrasonic Backscattered Signal

Effect of the void and crack quantity and location on ultrasound: resin experiments and carbon brick validation

A New Quantitative Acoustic Emission Model for Damage Characterization of Composite Laminates Using Original Waveforms

Delamination Analysis of Carbon Fiber/Epoxy Composite Laminates under Different Loading Rates Using Acoustic Emission

A unified trans-scale mechanical properties prediction method of 3D composites with void defects