Abstract:An infrared laser‐assisted direct ink writing process is developed to fabricate high‐fidelity polydimethylsiloxane (PDMS) structures with commercial thermally cured DOWSIL‐SE1700. The accelerated cross‐linking reaction arising from the irradiation energy of the laser significantly improves the collapse of large‐span architecture. The in situ preheating process also facilitates the fabrication of complex structures with thin wall features, exhibiting promising 3D printing capability. Polydimethylsiloxane (PDMS) is extensively applied in the 3D printing field due to its excellent biocompatibility, flexibility, and gas permeability. However, as a thermal curing material, its low strength before curing inevitably causes structural deformation during the printing process and deteriorates the shape accuracy. In this paper, an innovative method, the infrared laser‐assisted direct ink writing (DIW) process, is developed to realize the in situ preheating and curing of silicone materials to improve the strength of PDMS filaments during processing. Therefore, the large‐span spatial structure with high‐fidelity morphology can be produced. First, the feasibility is validated that temperature ascension of the voxels arising from the irradiation energy of the infrared laser can accelerate the cross‐linking reaction and realize the precuring of PDMS; then, the relationship between the parameters of laser irradiation and the processing performance of 3D printing is systematically investigated to find the optimization. Finally, experiments are conducted, including the single silicone filament, silicone foams, and complex 3D features. Their excellent structural preservation proves the proposed method is practical to fabricate the high‐fidelity fabrication of complex structures such as large spans and thin wall features, which will help to broaden the 3D printing capabilities of silicone in the development of flexible electronics and soft robots.

3D‐printed porous mullite lattice structures by hybrid direct ink writing of silicone suspension‐emulsions

High-strength, multifunctional and 3D printable mullite-based porous ceramics with a controllable shell-pore structure

Preparation and characteristics of honeycomb mullite ceramics with controllable structure by stereolithography 3D printing and in-situ synthesis

Direct-writing Assembly of High-Strength Hierarchical Porous Mullite-Based Lattices with a Multiscale Reinforcing Strategy

Ultrahigh Strength of Three-Dimensional Printed Diluted Magnesium Doping Wollastonite Porous Scaffolds

Mechanical and Dielectric Properties of 3D Printed Highly Porous Ceramics Fabricated Via Stable and Durable Gel Ink

Porous Mullite Ceramics with Hierarchical Pores Constructed Via Vat Photopolymerization of Multi-Phase Pickering Emulsion

Fabrication and Properties of Porous Mullite Ceramics from Directly Sintering Ceramic Microspheres

Microstructures, Mechanical Properties and Electromagnetic Wave Absorption Performance of Porous SiC Ceramics by Direct Foaming Combined with Direct-Ink-Writing-Based 3D Printing

Laser‐Assisted Direct Ink Writing for High‐Fidelity Fabrication of Elastomeric Complex Structures

Fabrication of SiOC Ceramic with Cellular Structure Via UV-Assisted Direct Ink Writing

3D Printing of Porous Si2N2O Ceramics Based on Strengthened Green Bodies Fabricated Via Strong Colloidal Gel

3D Printing of Hollow Microspheres into Strong Hierarchical Porous Ceramics

Digital Light Processing 3D‐Printed Silica Aerogel and as a Versatile Host Framework for High‐Performance Functional Nanocomposites

Porous Mullite Ceramics with Enhanced Mechanical Properties Prepared by SLS Using MnO2 and Phenolic Resin Coated Double-Shell Powders

Microstructure and properties of highly porous mullite materials fabricated by direct foaming-gelcasting

Facile Fabrication of Monolithic 3D Porous Silica Microstructures and a Microfluidic System Embedded with the Microstructure

3D printing of porous SiC ceramics added with SiO2 hollow microspheres

Fabrication of Porous Fibrous Alumina Ceramics by Direct Coagulation Casting Combined with 3D Printing

3D Printing by Multiphase Silicone/Water Capillary Inks

Design and Manufacturing of Si-Based Non-Oxide Cellular Ceramic Structures through Indirect 3D Printing