Abstract:The orbital fracture regeneration and reconstruction is still a catastrophic challenge due to the extremely thin anatomical structure and different defect shapes in various clinical conditions. The conventional bio-materials and preparation technique are often inefficient in satisfying porous scaffold architecture designs with respect to their required structural stability and biological performances. Here we developed the ultrathin scaffolds with high-precision pore structure and appreciable osteogenic activity for orbital bone repair via digital light processing (DLP) stereolithography. The dilute magnesium-substituting wollastonite (CSi-Mg) bioceramic scaffolds of similar to 1.5 mm in thickness and over 60% in porosity were investigated systematically, and compared with another calcium-magnesium silicate (i.e. akermanite) and the pure wollastonite porous counterparts. The results showed that the flexural strengths (similar to 6-22 MPa) and in vitro biodegradation of such bioceramic scaffolds could be tuned during their chemical composition (i.e. Mg content) design stage, and the CSi-Mg scaffolds were also beneficial for osteogenic cell activity in vitro. In particular, the CSi-Mg scaffolds could readily enhance the new bone ingrowth at 4 weeks of implantation in a critical-sized rabbit orbital bone defect model, and such strength-strong scaffolds exhibited outstanding orbital defect repair efficacy after 12 weeks of implantation, in comparison with the structural instability of other scaffolds. Basically, it is demonstrated that the dilute magnesium doping in wollastonite bioceramic can be favorable for developing the mechanically reliable scaffolds with high porosity and bioactivity but quite thin wall morphology, and meanwhile the DLP-assisted additive manufacturing help us to optimize such porous bioceramic design with respect to their required structural stability for orbital bone reconstruction. (C) 2020 Published by Elsevier Ltd.

Ultrahigh Strength of Three-Dimensional Printed Diluted Magnesium Doping Wollastonite Porous Scaffolds

3D-Printed Bioceramic Scaffolds with High Strength and High Precision

3D Printing Novel Porous Granule-Type Bioceramics Via Magnesium Tuning Biological Performances Beneficial for Implantation and Clinical Translation

3D Printing Magnesium-Doped Wollastonite/β-Tcp Bioceramics Scaffolds with High Strength and Adjustable Degradation

Effect of Foreign Ion Substitution and Micropore Tuning in Robocasting Single-Phase Bioceramic Scaffolds on the Physicochemical Property and Vascularization

3D Printed High-Strength Bioceramic Dome Scaffolds with Controllable Biodegradation for Guided Bone Regeneration

3D Printed Long-Term Structurally Stable Bioceramic Dome Scaffolds with Controllable Biodegradation Favorable for Guided Bone Regeneration

3D robocasting magnesium-doped wollastonite/TCP bioceramic scaffolds with improved bone regeneration capacity in critical sized calvarial defects

Digital Light Processing Strength-Strong Ultra-Thin Bioceramic Scaffolds for Challengeable Orbital Bone Regeneration and Repair in Situ

Systematical Evaluation of Mechanically Strong 3D Printed Diluted magnesium Doping Wollastonite Scaffolds on Osteogenic Capacity in Rabbit Calvarial Defects

Tuning filament composition and microstructure of 3D-printed bioceramic scaffolds facilitate bone defect regeneration and repair

The Outstanding Mechanical Response and Bone Regeneration Capacity of Robocast Dilute Magnesium-Doped Wollastonite Scaffolds in Critical Size Bone Defects.

Simultaneous Mechanical Property and Biodegradation Improvement of Wollastonite Bioceramic Through Magnesium Dilute Doping

Fabrication of 3D printed Ca3Mg3(PO4)4-based bioceramic scaffolds with tailorable high mechanical strength and osteostimulation effect

Nonstoichiometric wollastonite bioceramic scaffolds with core-shell pore struts and adjustable mechanical and biodegradable properties

Improvement in mechanical strength and biological function of 3D-printed trimagnesium phosphate bioceramic scaffolds by incorporating strontium orthosilicate

Additive manufacturing of magnesium-doped calcium silicate/zirconia ceramic scaffolds with projection-based 3D printing: Sintering, mechanical and biological behavior

Bone regeneration in 3D printing bioactive ceramic scaffolds with improved tissue/material interface pore architecture in thin-wall bone defect

3D printable magnesium-based cements towards the preparation of bioceramics

369Fabrication of 3D gel-printed β-tricalcium phosphate/titanium dioxide porous scaffolds for cancellous bone tissue engineering

Additive manufacturing and performance of bioceramic scaffolds with different hollow strut geometries