Abstract:Aspheric thin-walled crucibles with large diameters are widely used for photovoltaics and semiconductor industries, while they have hard-brittle and aspheric characteristics. Nevertheless, these crucibles strictly require atomic surfaces and high material removal rate (MRR). This is a challenge for chemical mechanical polishing (CMP). To break this challenge, a novel green CMP was developed for fused silica, containing ceria, lanthana, hydrogen peroxide, diethylene triaminepentaacetic acid pentasodium, carboxymethyl cellulose sodium and guanidine carbonate. After CMP, surface roughness Ra of 0.115 is obtained at a scanning area of 5 × 5 μm2 measured by atomic force microscopy, and MRR is 563 nm/min. In such an atomic surface, the MRR is the highest compared with those published previously. Transmission electron microscopy confirms that the thickness of damaged layer after CMP is only 2.63 nm. A novel approach of robot floating polishing is proposed for aspheric crucibles with a diameter of 810 mm and a height of 580 mm. Using the developed CMP, surface roughness Sa of 0.178 nm on inner surface of an aspheric thin-walled crucible is achieved under a measurement area of 50 × 50 μm2. X-ray photoelectron spectroscopy (XPS) and electron paramagnetic resonance reveal that the content of Ce3+ increased from 28.54 to 43.76 %. Through Raman, XPS and Fourier transform infrared spectroscopy, CMP mechanisms are elucidated. Densified damaged layer on the surface of fused silica was induced by the transformation of surface structure from six-membered to four- or three-membered network. Ce-OH and Si-OH were formed between fused silica and ceria abrasives, forming Ce-O-Si by condensation reaction of dehydration. The developed green CMP and approach provide new pathway to polish and manufacture atomic surfaces for aspheric thin-walled crucibles with large diameters.

Angstrom surface with high material removal rate for quartz glass induced by silk dissolved novel green chemical mechanical polishing

Novel green chemical mechanical polishing of fused silica through designing synergistic CeO 2 /h-BN abrasives with lubricity

Atomic surface induced by novel green chemical mechanical polishing for aspheric thin-walled crucibles with large diameters

Angstrom surface on copper induced by novel green chemical mechanical polishing using ceria and silica composite abrasives

Achieving Ultralow Surface Roughness and High Material Removal Rate in Fused Silica Via a Novel Acid SiO2 Slurry and Its Chemical-Mechanical Polishing Mechanism

Chemical mechanical polishing for sapphire wafers using a developed slurry

Application of surface analysis in study on removal mechanism and abrasive selection during fused silica chemical mechanical polishing

Unprecedented atomic surface of silicon induced by environmentally friendly chemical mechanical polishing

Non-spherical abrasives with ordered mesoporous structures for chemical mechanical polishing

Surface modulation to enhance chemical mechanical polishing performance of sliced silicon carbide Si-face

Novel green chemical mechanical polishing for an aluminum alloy and mechanisms interpreted by molecular dynamics simulations and measurements

XPS, UV–vis Spectroscopy and AFM Studies on Removal Mechanisms of Si-face SiC Wafer Chemical Mechanical Polishing (CMP)

Effect of cations on the improvement of material removal rate of silicon wafer in chemical mechanical polishing

Development of core–shell SiO 2 @A-TiO 2 abrasives and novel photocatalytic chemical machinal polishing for atomic surface of fused silica

A novel slurry for chemical mechanical polishing of single crystal diamond

Structural studies on the murine granulocyte colony-stimulating factor.

Mechanistic difference between Si-face and C-face polishing of 4H–SiC substrates in aqueous and non-aqueous slurries

Selective electrochemical mechanical polishing of 4H–SiC surface employing porous material impregnated with electrolyte

Chemical Mechanical Polishing (CMP) of On-Axis Si-face 6H-Sic Wafer for Obtaining Atomically Flat Defect-Free Surface

A special electrostatic self-assembly structure of colloidal silica: Improving Chemical Mechanical Polishing performance

Tribochemical mechanisms of abrasives for SiC and sapphire substrates in nanoscale polishing