Abstract:Electron leakage currents seriously limit the power conversion efficiencies (PCEs) of gallium nitride (GaN)-based laser diodes (LDs). To minimize the leakage currents, electron blocking layers are generally applied in the p-type region. However, few works have discussed the electron blocking effect of a p-cladding layer, which is found to be critical in suppressing the leakage currents of an LD. In this work, we compare the blocking performance of uniform AlGaN p-cladding layers and AlGaN/GaN superlattice (SL) p-cladding layers with the same average Al component respectively. Both light-emitting diodes (LEDs) and LDs with the same epitaxy structures are characterized by light-current (L-I) and current-voltage (I-V) measurements. The latest analytical model of leakage currents is applied to fit the L-I curves of LEDs, where smaller leakage coefficients are observed in the SL structures compared with the uniform-layer structures. Eighty LDs with varying ridge widths are studied by comparing the threshold current densities, slope efficiencies, and PCEs. The SL-based p-cladding layer shows statistically significant advantages over a uniform AlGaN layer. The blocking effects of both scattering- and bound-state electrons in SLs are investigated theoretically. Repetitive reflection and thermal relaxation are responsible for the blocking effect of scattering-state electrons. Simulation results indicate that the tunneling effect of bound-state electrons through a miniband mechanism is insignificant at a large injection level due to a negative differential conductivity by the Esaki-Tsu effect. We demonstrate a better electron blocking performance of p-cladding layers based on SLs than uniform AlGaN layers in GaN-based LDs.

Optimization of p-cladding layer utilizing polarization doping for Blue-Violet InGaN laser diodes

Improvement of Blue Llight-Ight-ight-eeemitting Mitting Ddiodes Iodes with an Undoped Graded Layer As the Electrons Tunneling Barrier Layer

Internal loss of AlGaN-based ultraviolet-B band laser diodes with p-type AlGaN cladding layer using polarization doping

Demonstrating the Electron Blocking Effect of AlGaN/GaN Superlattice Cladding Layers in GaN-based Laser Diodes

Polarization-Doped InGaN LEDs and Laser Diodes for Broad Temperature Range Operation

Characterization of GaInN/GaN layers for green emitting laser diodes

Improving optical and electrical properties of InGaN-based green laser diodes by graded-compositional waveguide structure

Performance improvement of 263 nm AlGaN DUV LDs with different doping concentration and composition graded EBL Techniques

Effect of Asymmetric InAlGaN/GaN Superlattice Barrier Structure on the Optoelectronic Performance of GaN-Based Green Laser Diode

Compositional Degradation of the Electron Blocking Layers Through Solid-Solution in GaN-based Laser Diodes

High-Power and High-Efficiency 221 nm AlGaN Deep Ultraviolet Laser Diodes

Impact of unintentionally formed compositionally graded layer on carrier injection efficiency in AlGaN-based deep-ultraviolet laser diodes

Electrically pumped blue laser diodes with nanoporous bottom cladding

Optimization of the Electron Blocking Layer in GaN Laser Diodes

Enhanced performance in deep-ultraviolet laser diodes with an undoped BGaN electron blocking layer.

Advantage Of Tapered And Graded Algan Electron Blocking Layer In Ingan-Based Blue Laser Diodes

High performance deep violet InGaN TQW laser diode through multi-layer thickness optimization using particle swarm optimization method

A design and comparative investigation of graded AlxGa1 − x N QB for W-Al0.58GaN/W-Al0.64–0.58 GaN DUV laser diode on AlN substrate

Improvement of Hole Injection and Electron Overflow by a Tapered AlGaN Electron Blocking Layer in InGaN-based Blue Laser Diodes

High-efficiency circularly polarized green light emission from GaN-based laser diodes integrated with GaN metasurface quarterwave plate

Design of P-Type Cladding Layers for Tunnel-Injected UVA Light Emitting Diodes