Abstract:In this paper, 2 atom % Al-doped ZnO (AZO) was prepared by the co-precipitation method together with sparking plasma sintering (SPS) treatment. The as-synthesized AZO powders show the morphology of hollow hexagonal towers, which result in a high porosity of 50.6% in the bulk sample consolidated by SPS sintering at 400 °C, and the porosity decreases gradually with increasing sintering temperature up to 1000 °C. Positron annihilation measurements reveal that even after sintering at 1000 °C, there are still a considerable number of small pores. A high electrical conductivity of 3 × 105 S m–1 is achieved at room temperature for the AZO sample sintered at 1000 °C, while the absolute values of Seebeck coefficient keep at relatively high values between 59 and 144 μV K–1 in the measurement temperature range of 27–500 °C, leading to a high power factor of 3.4 × 10–3 W m–1 K–2. On the other hand, the pores in AZO act as strong phonon scattering centers, and an extremely low thermal conductivity of 1.5 W m–1 K–1 measured at room temperature is obtained for AZO sintered at 400 °C. Due to the residual pores in the 1000 °C-sintered sample, the thermal conductivity is still relatively low. As a result, a maximum ZT of 0.275 measured at 500 °C is obtained in this sample, which is the highest ZT reported for ZnO around this temperature.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16506?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16506</a>.Thermal gravity analysis for the Al-doped ZnO (Figure S1), TEM images of Al-doped ZnO sintered at different temperatures (Figure S2), and structural characterization and thermoelectric properties of undoped ZnO prepared by co-precipitation combined with SPS treatment (Figures S3–S5) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16506/suppl_file/am0c16506_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Thermal conductivity suppression in ZnO with AlZn 2 O 4 and ZnP 2 for thermoelectric applications

Enhanced thermoelectric performance of n -type PbTe bulk materials fabricated by semisolid powder processing

High Thermoelectric Performance of ZnO by Coherent Phonon Scattering and Optimized Charge Transport

Significant Enhancement in the Thermoelectric Performance of Aluminum-Doped ZnO Tuned by Pore Structure

Microstructure and thermoelectric properties of Al-doped ZnO ceramic prepared by spark plasma sintering

Optimization of thermoelectric properties of Al-doped Zn1−xAlxO under high pressure and high temperature

Enhanced thermoelectric properties of ZnO: C doping and band gap tuning

Influence of Core-Shell Structure on Thermoelectric Properties of Zn0.98Al0.02O

Microstructure and thermoelectric properties of Zn1−xAlxO ceramics fabricated by spark plasma sintering

Role of intrinsic defects on thermoelectric properties of ZnO:Al films

High-temperature Electrical and Thermal Transport Behaviors of In2O3-based Ceramics by Zn-Sn Co-Substitution

Record‐High Thermoelectric Performance in Al‐Doped ZnO via Anderson Localization of Band Edge States

Zinc Doping Induces Enhanced Thermoelectric Performance of Solvothermal SnTe

Thermoelectric Properties and Microstructure of (zn0.98al0.02)o Prepared by MA/HP Process

Synergistic effects of zirconium- and aluminum co-doping on the thermoelectric performance of zinc oxide

Enhanced thermoelectric performance in aluminum-doped zinc oxide by porous architecture and nanoinclusions

Enhanced Thermoelectric Performance of N-Type Bi2S3with Added ZnO for Power Generation

Improvement mechanism of thermoelectric properties of ZnO ceramics by energy band regulation

ZnO-Nanoparticle-Dispersed Cu11.5Ni0.5Sb4S13−δ Tetrahedrite Composites with Enhanced Thermoelectric Performance

One-step Chemical Synthesis of ZnO/graphene Oxide Molecular Hybrids for High-Temperature Thermoelectric Applications.

Suppressed lattice thermal conductivity in porous compounds for high-performance thermoelectric applications