Abstract:Copper Sulfide as a type of environmentally friendly and low-cost thermoelectric material has attracted extensive attention in the last few years. However, the thermoelectric performance and stability of pristine copper sulfides are poor because of the excessive hole concentration and Cu-ion migration behavior in the high temperature, which are the key reason why this material system can't become the candidate of commercial application. In this paper, carbon nanotubes (CNTs) were coated with CuO by ultrasonic spraying pyrolysis, and then waiting to be compounded with Cu 1.8 S material. A series of copper sulfide-based composites were produced by combining with solid-state reaction (SSR) and spark plasma sintering (SPS) technique. The effect of dispersing CNT/CuO on optimizing thermoelectric properties of copper sulfide was investigated in detail in the temperature range from 323 K to 773 K. Carrier concentration of copper sulfides was tuned by carefully regulating Cu vacancies, resulting in the significantly improved Seebeck coefficient. Meanwhile, the thermal conductivity was drastically decreased owing to the introduced pores and weakened contribution from electrical conductivity. A maximum thermoelectric figure of merit ( ZT ) value of 1.05 was obtained at 773 K for the copper sulfide-based bulk composite, namely Cu 1.8 S-5 wt. % CNT/CuO, which was twice as higher as the pristine Cu 1.8 S specimen. This bulk composite also exhibits a relatively stable thermoelectric performance in the cycling test.

ZnO-Nanoparticle-Dispersed Cu11.5Ni0.5Sb4S13−δ Tetrahedrite Composites with Enhanced Thermoelectric Performance

Enhanced performance of thermoelectric nanocomposites based on Cu12Sb4S13 tetrahedrite

Nanostructure Engineering and Performance Enhancement in Fe2O3-Dispersed Cu12Sb4S13 Thermoelectric Composites with Earth-Abundant Elements.

Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

Enhanced thermoelectric performance of Cu 12 Sb 4 S 13− δ tetrahedrite via nickel doping

Enhanced thermoelectric properties of Cu1.8S via the introduction of ZnS nanostructures

Enhanced thermoelectric performance of Cu12Sb4S13-delta tetrahedrite via nickel doping

Excellent thermoelectric properties and stability realized in copper sulfides based composites via complex nanostructuring

Enhanced thermoelectric performance of Cu12Sb4S13___etrahedrite via nickel doping

Reduced thermal conductivity and improved ZT of Cu-doped SnS-based bulk thermoelectric materials via compositing SnS nano-fiber strategy

Highly enhanced thermoelectric performance of copper sulfide by compositing with CNT & CuO

Lead-free AgSn4SbTe6 Nanocomposites with Enhanced Thermoelectric Properties by SiC Nanodispersion

Enhancing thermoelectric performance of Cu1.8S by Sb/Sn co-doping and incorporating multiscale defects to scatter heat-carrying phonons

High thermoelectric performance realized in porous Cu1.8S based composites by Na2S addition

Enhanced Thermoelectric Performance of Hydrothermal Synthesized Ag Incorporated Cu &Lt;sub>2-X</sub>s Micro/Nano Composites

Thermoelectric Performance of Hydrothermally Synthesized Micro/nano Cu2-xS

Thermoelectric and Mechanical Properties of ZnSb/SiC Nanocomposites

BiSbTe-based nanocomposites with high ZT: The effect of SiC nanodispersion on thermoelectric properties

Enhanced Thermoelectric Performance of Zn-doped Oxyselenides: BiCu1−x Zn X SeO

Zinc Doping Induces Enhanced Thermoelectric Performance of Solvothermal SnTe

Composite of carbon dots and TiNiSn thermoelectric materials: Initial investigation on the electrical and thermal transport properties