Abstract:Composite materials offer numerous advantages in a wide range of applications, including thermoelectrics. Here, semiconductor-metal composites are produced by just blending nanoparticles of a sulfide semiconductor obtained in aqueous solution and at room temperature with a metallic Cu powder. The obtained blend is annealed in a reducing atmosphere and afterward consolidated into dense polycrystalline pellets through spark plasma sintering (SPS). We observe that, during the annealing process, the presence of metallic copper activates a partial reduction of the PbS, resulting in the formation of PbS-Pb-CuxS composites. The presence of metallic lead during the SPS process habilitates the liquid-phase sintering of the composite. Besides, by comparing the transport properties of PbS, the PbS-Pb-CuxS composites, and PbS-CuxS composites obtained by blending PbS and CuxS nanoparticles, we demonstrate that the presence of metallic lead decisively contributes to a strong increase of the charge carrier concentration through spillover of charge carriers enabled by the low work function of lead. The increase in charge carrier concentration translates into much higher electrical conductivities and moderately lower Seebeck coefficients. These properties translate into power factors up to 2.1 mW m-1 K-2 at ambient temperature, well above those of PbS and PbS + CuxS. Additionally, the presence of multiple phases in the final composite results in a notable decrease in the lattice thermal conductivity. Overall, the introduction of metallic copper in the initial blend results in a significant improvement of the thermoelectric performance of PbS, reaching a dimensionless thermoelectric figure of merit ZT = 1.1 at 750 K, which represents about a 400% increase over bare PbS. Besides, an average ZTave = 0.72 in the temperature range 320-773 K is demonstrated.

High thermoelectric performance realized in porous Cu1.8S based composites by Na2S addition

Enhanced thermoelectric properties of Cu1.8S via the introduction of ZnS nanostructures

Excellent thermoelectric properties and stability realized in copper sulfides based composites via complex nanostructuring

Enhanced performance of thermoelectric nanocomposites based on Cu12Sb4S13 tetrahedrite

Enhanced Thermoelectric Performance of Hydrothermal Synthesized Ag Incorporated Cu &Lt;sub>2-X</sub>s Micro/Nano Composites

Enhancing thermoelectric performance of Cu1.8S by Sb/Sn co-doping and incorporating multiscale defects to scatter heat-carrying phonons

Thermoelectric Performance of Hydrothermally Synthesized Micro/nano Cu2-xS

Effects of sintering temperature on thermoelectric properties of Cu1.8S bulk materials

Ultralow Thermal Conductivity and Extraordinary Thermoelectric Performance Realized in Codoped Cu3SbSe4 by Plasma Spark Sintering

Approaching high thermoelectric performance in p-type Cu3SbS4-based materials by rational electronic and nano/microstructural engineering

Multiscale architectures boosting thermoelectric performance of copper sulfide compound

Realizing the Ultralow Lattice Thermal Conductivity of Cu3SbSe4 Compound via Sulfur Alloying Effect

Highly enhanced thermoelectric performance of copper sulfide by compositing with CNT & CuO

Boosting thermoelectric performance in Cu3SbS4-based compounds through incorporating SiC nanoparticles

Enhancing thermoelectric and mechanical properties of p-type Cu3SbSe4-based materials via embedding nanoscale Sb2Se3

Enhanced thermoelectric performance of Bi2-xCuxS3 by hydrothermal synthesis and spark plasma sintering

Phase Tuning for Enhancing the Thermoelectric Performance of Solution-Synthesized Cu 2– x S

ZnO-Nanoparticle-Dispersed Cu11.5Ni0.5Sb4S13−δ Tetrahedrite Composites with Enhanced Thermoelectric Performance

Reduced thermal conductivity and improved ZT of Cu-doped SnS-based bulk thermoelectric materials via compositing SnS nano-fiber strategy

PbS–Pb–Cu x S Composites for Thermoelectric Application

High Thermoelectric Performance of Co-doped Cu2SnS3-attapulgite Nano-Composites Achieved by Synergetic Manipulation of Electrical and Thermal Transport Properties