Abstract:Composite materials offer numerous advantages in a wide range of applications, including thermoelectrics. Here, semiconductor-metal composites are produced by just blending nanoparticles of a sulfide semiconductor obtained in aqueous solution and at room temperature with a metallic Cu powder. The obtained blend is annealed in a reducing atmosphere and afterward consolidated into dense polycrystalline pellets through spark plasma sintering (SPS). We observe that, during the annealing process, the presence of metallic copper activates a partial reduction of the PbS, resulting in the formation of PbS-Pb-CuxS composites. The presence of metallic lead during the SPS process habilitates the liquid-phase sintering of the composite. Besides, by comparing the transport properties of PbS, the PbS-Pb-CuxS composites, and PbS-CuxS composites obtained by blending PbS and CuxS nanoparticles, we demonstrate that the presence of metallic lead decisively contributes to a strong increase of the charge carrier concentration through spillover of charge carriers enabled by the low work function of lead. The increase in charge carrier concentration translates into much higher electrical conductivities and moderately lower Seebeck coefficients. These properties translate into power factors up to 2.1 mW m-1 K-2 at ambient temperature, well above those of PbS and PbS + CuxS. Additionally, the presence of multiple phases in the final composite results in a notable decrease in the lattice thermal conductivity. Overall, the introduction of metallic copper in the initial blend results in a significant improvement of the thermoelectric performance of PbS, reaching a dimensionless thermoelectric figure of merit ZT = 1.1 at 750 K, which represents about a 400% increase over bare PbS. Besides, an average ZTave = 0.72 in the temperature range 320-773 K is demonstrated.

Highly enhanced thermoelectric performance of copper sulfide by compositing with CNT & CuO

Excellent thermoelectric properties and stability realized in copper sulfides based composites via complex nanostructuring

Highly enhanced stability and thermoelectric performance of copper sulfides-based composites by multiphase engineering

Enhanced thermoelectric properties of Cu1.8S via the introduction of ZnS nanostructures

Graphene Network in Copper Sulfide Leading to Enhanced Thermoelectric Properties and Thermal Stability

Multiscale architectures boosting thermoelectric performance of copper sulfide compound

Enhanced performance of thermoelectric nanocomposites based on Cu12Sb4S13 tetrahedrite

Approaching high thermoelectric performance in p-type Cu3SbS4-based materials by rational electronic and nano/microstructural engineering

ZnO-Nanoparticle-Dispersed Cu11.5Ni0.5Sb4S13−δ Tetrahedrite Composites with Enhanced Thermoelectric Performance

Enhancing thermoelectric and mechanical properties of p-type Cu3SbSe4-based materials via embedding nanoscale Sb2Se3

Enhanced Thermoelectric Performance of BiCuSeO Composites with Nanoinclusion of Copper Selenides

High thermoelectric performance realized in porous Cu1.8S based composites by Na2S addition

Enhancing thermoelectric performance of Cu1.8S by Sb/Sn co-doping and incorporating multiscale defects to scatter heat-carrying phonons

Facile Synthesis of Monodisperse Cu3SbSe4 Nanoparticles and Thermoelectric Performance of Cu3SbSe4 Nanoparticle-Based Materials

Enhanced Thermoelectric Performance of Hydrothermal Synthesized Ag Incorporated Cu &Lt;sub>2-X</sub>s Micro/Nano Composites

Highly stabilized and efficient thermoelectric copper selenide

PbS–Pb–Cu x S Composites for Thermoelectric Application

Compositing effects for high thermoelectric performance of Cu2Se-based materials

Thermoelectric Performance of Hydrothermally Synthesized Micro/nano Cu2-xS

Realizing the Ultralow Lattice Thermal Conductivity of Cu3SbSe4 Compound via Sulfur Alloying Effect

Ultralow Thermal Conductivity and Extraordinary Thermoelectric Performance Realized in Codoped Cu3SbSe4 by Plasma Spark Sintering