Abstract:In this paper, 2 atom % Al-doped ZnO (AZO) was prepared by the co-precipitation method together with sparking plasma sintering (SPS) treatment. The as-synthesized AZO powders show the morphology of hollow hexagonal towers, which result in a high porosity of 50.6% in the bulk sample consolidated by SPS sintering at 400 °C, and the porosity decreases gradually with increasing sintering temperature up to 1000 °C. Positron annihilation measurements reveal that even after sintering at 1000 °C, there are still a considerable number of small pores. A high electrical conductivity of 3 × 105 S m–1 is achieved at room temperature for the AZO sample sintered at 1000 °C, while the absolute values of Seebeck coefficient keep at relatively high values between 59 and 144 μV K–1 in the measurement temperature range of 27–500 °C, leading to a high power factor of 3.4 × 10–3 W m–1 K–2. On the other hand, the pores in AZO act as strong phonon scattering centers, and an extremely low thermal conductivity of 1.5 W m–1 K–1 measured at room temperature is obtained for AZO sintered at 400 °C. Due to the residual pores in the 1000 °C-sintered sample, the thermal conductivity is still relatively low. As a result, a maximum ZT of 0.275 measured at 500 °C is obtained in this sample, which is the highest ZT reported for ZnO around this temperature.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c16506?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c16506</a>.Thermal gravity analysis for the Al-doped ZnO (Figure S1), TEM images of Al-doped ZnO sintered at different temperatures (Figure S2), and structural characterization and thermoelectric properties of undoped ZnO prepared by co-precipitation combined with SPS treatment (Figures S3–S5) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c16506/suppl_file/am0c16506_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Enhanced thermoelectric properties of ZnO: C doping and band gap tuning

Improvement mechanism of thermoelectric properties of ZnO ceramics by energy band regulation

The influence mechanism of donor doping from alkaline earth element on the thermoelectric properties of ZnO semiconductor materials for electricity meter

Study on the physical mechanism of thermoelectric transport on the properties of ZnO ceramics

Enhancement of Thermoelectric Performance in Robust ZnO‐Based Composite Ceramics Driven by A Stepwise Optimization Strategy

Zinc Doping Induces Enhanced Thermoelectric Performance of Solvothermal SnTe

High Thermoelectric Performance of ZnO by Coherent Phonon Scattering and Optimized Charge Transport

Study on the mechanism of influence of impurity levels introduced by doping high-valence element on the properties of zinc oxide thermoelectric materials

The influence mechanism of high-valence rare earth element doping on the thermoelectric properties of ZnO

Thermal conductivity suppression in ZnO with AlZn 2 O 4 and ZnP 2 for thermoelectric applications

Enhanced Thermoelectric Performance of ZnO-Based Thin Films via Interface Engineering

High thermoelectric performance of Nb-doped SrTiO3 bulk materials with different doping levels

Significant Enhancement in the Thermoelectric Performance of Aluminum-Doped ZnO Tuned by Pore Structure

Regulation of oxygen vacancy and reduction of lattice thermal conductivity in ZnO ceramic by high temperature and high pressure method

Molybdenum-doped zinc oxide: enhanced thermoelectric performances and unprecedented mechanical strengthening used for smart meters

Optimization of thermoelectric properties of Al-doped Zn1−xAlxO under high pressure and high temperature

Improvement in thermoelectric properties of Zn-Mn co-doped nanostructured SnTe through band engineering and chemical bond softening

Record‐High Thermoelectric Performance in Al‐Doped ZnO via Anderson Localization of Band Edge States

Enhanced Thermoelectric Performance of N-Type Bi2S3with Added ZnO for Power Generation

Achieving High Thermoelectric Performance in ZnSe-Doped CuGaTe2 by Optimizing the Carrier Concentration and Reducing Thermal Conductivity

Tuning the Thermoelectric Properties of Ca9zn4+Xsb9 by Controlled Doping on the Interstitial Structure