Abstract:(Cu50Zr50)(x)(Cu73Ti27)(100-x) (x = 0.63-0.75 at.%) alloys are designed using the proportional mixing of Cu(50)Zr(50 )and Cu73Ti27 binary alloys. Their thermal, mechanical and corrosive properties as well as the glass forming ability (GFA) are systematically investigated. The results show that the studied Cu-based glass forming alloys are bulk metallic glass composites (BMGCs) with off-eutectic compositions and display work-hardening behavior. The glass transition temperature and the reduced glass transition temperature increase and then decrease with increasing x when x >= 0.74 atop, while on the contrary for the critical cooling rate and supercooled liquid region. Both yield strength and fracture strength firstly increase and then decrease with decreasing x when x <= 0.71 at%. The plastic strain of (Cu50Zr50)(0.)(75)(Cu73Ti27)(0.)(25) BMGC is the largest among the studied Cu-based BMGCs. Potentiodynamic polarization measurements show that all studied BMGCs exhibit a step-like anodic polarization behavior, indicating two competitive procedures of pitting corrosion and self-passivization. The corrosion behavior gradually transforms from predominant self-passivization to the pitting corrosion with decreasing x. Both corrosion current density and onset passive current density of (Cu50Zr50)(0.)(75)(Cu73Ti27)(0.)(25) BMGCs are two orders of magnitude lower than those of the other Cu-based BMGCs. The mechanisms for the GFA and the corrosion are also discussed. The present work would shed light on how to design and develop BMGCs with superior comprehensive performances.

Versatile Medium Entropy Ti-Based Bulk Metallic Glass Composites

Concurrently achieving strength-ductility combination and robust anti-wear performance in an in-situ high-entropy bulk metallic glass composite

Dynamic Mechanical Behavior of In-situ (ti0.474zr0.34cu0.06be0.126) 100-Xfex (x=0, 2) Bulk Metallic Glass Composites

Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites

Mechanical properties of Ti16.7Zr16.7Hf16.7Cu16.7Ni16.7Be16.7 high-entropy bulk metallic glass

TRIP-Reinforced Bulk Metallic Glass

Microstructure and Mechanical Properties of Ti48Zr18V12Cu5Be17 Bulk Metallic Glass Composite

Synthesis and Mechanical Behavior of In-Situ Porous Ti Particle Reinforced Mg-Cu-Gd-Ag Bulk Metallic Glass Matrix Composite

A New Cu-Based Metallic Glass Composite with Excellent Mechanical Properties

Microstructure Evolution and Mechanical Properties of A Ti-Based Bulk Metallic Glass Composite

Fe-based bulk metallic glass matrix composite with large plasticity

Development of tough, low-density titanium-based bulk metallic glass matrix composites with tensile ductility

Tensile Deformation Mechanism of an In Situ Formed Ti-Based Bulk Metallic Glass Composites

Deformation Micromechanisms of a Ti-Based Metallic Glass Composite with Excellent Mechanical Properties

Microstructure and Deformation Mechanism of Titanium-Based Metallic Glass Matrix Composites

Metal frame reinforced bulk metallic glass composites

Strengthening Ti-based Bulk Metallic Glass Composites Containing Phase Transformable Β-Ti Via Al Addition

Mg-based Bulk Metallic Glass Composites with Plasticity and Gigapascal Strength

Composition Design and Properties of Cu–Zr–Ti Bulk Metallic Glass Composites

Bulk Metallic Glass Composites Containing B2 Phase

A Strategy for Designing Bulk Metallic Glass Composites with Excellent Work-Hardening and Large Tensile Ductility