Abstract:In this study, we develop a non-equiatomic Co2CrNi1.5Al0.25Ti0.25 quinary medium-entropy alloy (MEA). The heterogeneous grain structure (HGS) (comprising residual deformed grains, micro-sized recrystallized grains and nano-sized recrystallized grains) and heterogeneous precipitation (HP) of the L12 phase corresponding to different kinds of grain structures are simultaneously introduced into the alloy by the well-designed thermomechanical processing. The alloy exhibits an ultra-high yield stress (<math>σy</math>) of 1.73 GPa, ultimate tensile stress (<math>σu</math>) of 1.89 GPa and remarkable total elongation (<math>εte</math>) up to 16.0% at 293 K, as well as ultra-high <math>σy</math> up to 2.02 GPa, <math>σu</math> up to 2.31 GPa and excellent <math>εte</math> up to 21.2% at 77 K. The synergy of multiple hardening mechanisms, mainly including back-stress hardening, precipitation hardening and pre-existed dislocation hardening contributes to the ultra-high <math>σy</math> at 293 K and 77 K. The HGS promotes the continuously increased geometrically necessary dislocations (GNDs) density, which, combined with the nano-spaced stacking fault (SF) networks, leads to the outstanding three-stage work-hardening behaviors during tensile tests at 293 K and 77 K. The simultaneous introduction of HGS and HP into this newly-developed MEA without brittle intermetallic phase, is a new effective method in designing high-performance alloys applied at both ambient and cryogenic temperatures.

A bridge from metallic glasses to medium-entropy alloys in Ti-Cu-Zr-Pd-Co system: Design, microstructure, and deformation-induced-martensitic transformation

Designing transformation-induced plasticity and twinning-induced plasticity Cr-Co-Ni medium entropy alloys: theory and experiment

Concurrently achieving strength-ductility combination and robust anti-wear performance in an in-situ high-entropy bulk metallic glass composite

Decreasing Zr content to improve tensile properties of non-equiatomic TiZrHfNb medium entropy alloys with transformation-induced plasticity

Unraveling dual phase transformations in a CrCoNi medium-entropy alloy

Tensile Deformation Mechanism of an In Situ Formed Ti-Based Bulk Metallic Glass Composites

Strengthening mechanisms and microstructural evolution of ductile refractory medium-entropy alloy Hf<sub>20</sub>Nb<sub>10</sub>Ti<sub>35</sub>Zr<sub>35</sub>

Toughening FeMn-based High-Entropy Alloys Via Retarding Phase Transformation

Composition design and mechanical properties of ternary Cu–Zr–Ti bulk metallic glasses

Microstructure and Phase Transformation of Ni46Mn33Ga17Cu4−xZrx Alloys

Unusual phase transformation and novel hardening mechanisms upon impact loading in a medium entropy alloy with dual heterogeneous structure

Heterogeneous-structure-induced ultrahigh strength and ductility in a metastable dual-phase Fe60Cr15Ni16Al9 medium entropy alloy

Exceptionally high strain-hardening and ductility due to transformation induced plasticity effect in Ti-rich high-entropy alloys

Twin-induced transformation strengthening of CoCrNi-based medium-entropy alloy with a gradient nanostructure

FCC to BCC transformation-induced plasticity based on thermodynamic phase stability in novel V10Cr10Fe45CoxNi35−x medium-entropy alloys

Microstructural evolution, strengthening and high thermal conductivity mechanisms of FeCrV-based medium-entropy alloys with Laves phase precipitation formed by adding minimal Ti

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

In situ high-energy X-ray diffraction study of thermally-activated martensitic transformation far below room temperature in CuZr-based bulk metallic glass composites

Microstructure and Deformation Mechanism of Titanium-Based Metallic Glass Matrix Composites

Composition design to tune the mechanical behavior of a TRIP-TWIP (CrMnFeCoNi)50 Fe50-xCrx multi-principal element alloys

Designing new work-hardenable ductile Ti-based multilayered bulk metallic glass composites with ex-situ and in-situ hybrid strategy