Abstract:The improved understandings of the mechanical properties as well as deformation mechanisms at cryogenic temperatures are the prerequisite for realizing the application of any new engineering materials to cryogenic industries. Here, a (CoCrNi) 94 Al 3 Ti 3 medium entropy alloy (MEA) with nanoscale L1 2 coherent precipitates and heterogeneous grain structures was prepared by co-doping Al and Ti elements with subsequent cold rolling and heat treatment processes. The mechanical properties were evaluated at the temperature range of 293–113 K. The ultimate strength of the MEA increases almost linearly from 1326 to 1695 MPa as the temperature decreases from 293 to 113 K, while the total elongation remains approximately constant of ∼35%. The underlying deformation and strengthening mechanisms were investigated using various characterization techniques. Due to the effect of co-doped Al/Ti on channel width of the matrix and the increasing critical twinning stress induced by heterogeneous ultrafine grain size, the formation of deformation twins is inhibited at all temperatures. Consequently, only a slight increase of the deformation twins and stacking faults in the deformed specimens with a decreasing temperature, which leads to the relative temperature-independence of the ductility. The dislocation cutting mechanism of L1 2 coherent precipitates and the heterodeformation induced (HDI) hardening both significantly contribute to the strain hardening so that an excellent combination of strength and ductility is obtained. Additionally, the evolution of lattice friction stress with deformation temperature is determined by quantitative analysis, indicating an approximately linear relationship between the lattice friction and temperature. The present work provides new insights into the strategy of achieving outstanding strength-ductility synergy of the MEA under the wide temperature range by coupling heterogeneous ultrafine-grained structure and coherent precipitation strategy.

Microstructural evolution, strengthening and high thermal conductivity mechanisms of FeCrV-based medium-entropy alloys with Laves phase precipitation formed by adding minimal Ti

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Effects of Ti and Al Additions on Microstructure and Mechanical Properties of FeCrNi Medium Entropy Alloy Fabricated by Laser Powder Bed Fusion

Microstructure and Nano-hardness of Reduced Activation FeCrV-Based High Entropy Alloys with Abundant Ti Addition

Remarkable Enhanced Mechanical Properties of TiAlCrNbV Medium-Entropy Alloy with Zr Additions

Microstructural optimization of Fe x CrNiAl 0.5 Ti 0.5 high entropy alloys toward high ductility

Ultrastrong and Ductile Metastable Fe-rich Medium-Entropy Alloy with High-Density Nanolamellar L12 Precipitates

Microstructure and mechanical properties of CrFeNi high-entropy alloy reinforced by Al and Ti elements

Heterogeneous-structure-induced ultrahigh strength and ductility in a metastable dual-phase Fe60Cr15Ni16Al9 medium entropy alloy

Precipitation and heterogeneous strengthened CoCrNi-based medium entropy alloy with excellent strength-ductility combination from room to cryogenic temperatures

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

Manipulation of precipitation and mechanical properties of precipitation-strengthened medium-entropy alloy

Effects of precipitated phase on the synergy of corrosion resistance and mechanical properties for FeCrVTi x medium-entropy alloys

Microstructure and Mechanical Properties of Medium-Entropy Alloys with a High-Density Η-D024 Phase

Studies on the design and properties of FeCrVTix medium-entropy alloys for potential nuclear applications

Phase Stability and Precipitation in L1 2 -Strengthened CoCrNi Medium-Entropy Alloys at Intermediate Temperatures

Microstructure and tensile properties of Co-free Fe4CrNi(AlTi) high-entropy alloys

Microstructure, Mechanical Properties, and Corrosion Behavior of MoNbFeCrV, MoNbFeCrTi, and MoNbFeVTi High-Entropy Alloys

Influence of annealing temperatures on the microstructure and deformation behavior of a CrCoNi based medium-entropy alloy

Low neutron cross-section FeCrVTiNi based high-entropy alloys: design, additive manufacturing and characterization

Microstructure and Mechanical Properties of Co-free Ni2FeCrW Medium-Entropy Alloys Reinforced by Coherent Precipitates