Abstract:As Cr/Fe ratio increases in Fe75.7−xCrxNi15.1Al4.6Ti4.6 (in molar ratio, x = 17.1–25.3) high‐entropy alloys (HEAs), the tensile strength rises sharply and the plasticity decreases rapidly. Specifically, Fe56.8Cr18.9Ni15.1Al4.6Ti4.6 exhibits a good combination of the strength (1142 MPa) and the elongation (9.5%). In the designed HEAs, second‐phase strengthening is the dominate mechanism. According to the effect of valence electron concentration (VEC) on the phase evolution of high‐entropy alloys (HEAs), Fe75.7−xCrxNi15.1Al4.6Ti4.6 (at%, x = 17.1, 18.9, 20.6, 22.3, and 25.3) HEAs are designed. Effects of the Cr addition on the microstructure and tensile properties are investigated systemically. As the Cr/Fe ratio increases (i.e., decreasing VEC), there is a phase transition from face‐centered‐cubic (FCC) to body‐centered‐cubic (BCC) and Heusler‐type β′ ‐Ni2TiAl (L21). When x is between 17.1 and 22.3, the alloys, with the mixed structure of the FCC and BCC/L21 phases, behave like composites with a sharp increase in strength but reduced ductility. When x = 25.3, the alloy, with only BCC/L21 phases, becomes extremely brittle. Specifically, Fe56.8Cr18.9Ni15.1Al4.6Ti4.6 exhibits a good combination of a high strength of 1142 MPa and an elongation strain of 9.5%. The excellent tensile properties of this alloy are attributed to the synergetic effects of a soft FCC phase, a hard BCC phase, and the uniform distribution of high‐density L21 nanoparticles in BCC matrix. The phase‐evolution principle is delineated by parameters of the VEC and the atomic size difference (δ), and the strengthening mechanism is well discussed. These findings offer a guidance for the development of BCC/L21‐containing HEAs for practical applications.

Microstructure and Nano-hardness of Reduced Activation FeCrV-Based High Entropy Alloys with Abundant Ti Addition

Microstructural Evolution and Elevated-Temperature Strengthening Mechanism of Co-free FeCrMnNiV0.2Alx High-Entropy Alloys During Annealing

Evolution of microstructure and mechanical characteristics of (CrFeNiCu)100–xTix high-entropy alloys

Microstructure and mechanical properties of CrFeNi high-entropy alloy reinforced by Al and Ti elements

Effects of Cr/Fe Ratio on Structural Evolution and Tensile Properties of the Fe75.7−xCrxNi15.1Al4.6Ti4.6 High‐Entropy Alloys

Microstructures and Mechanical Properties of AlCrFeNiMo 0.5 Ti X High Entropy Alloys

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Microstructure and tensile properties of Co-free Fe4CrNi(AlTi) high-entropy alloys

Effects of Ti addition and annealing on microstructure and mechanical properties of CoCrFeMnNi high-entropy alloy

Effect of TiC Addition on the High-Temperature Hardness and the Carbide Stability in Al0.2CoCrFeNi1.5Ti High-Entropy Alloy

Microstructural evolution, strengthening and high thermal conductivity mechanisms of FeCrV-based medium-entropy alloys with Laves phase precipitation formed by adding minimal Ti

Equiatomic, Cu‐Containing CrCuFeTiV 3d Transition Metal High Entropy Alloy with an Enhanced Strength and Hardness Synergy

Influences of Ti additions on the microstructure and tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy

Effect of Ti Content on the Microstructure and Properties of CoCrFeNiMnTix High Entropy Alloy

Effects of Ti Content on the Microstructure and Mechanical Properties of Al0.2CoCrFeNi2Tix High-Entropy Alloys

Influence of Al and Ti Alloying and Annealing on the Microstructure and Compressive Properties of Cr-Fe-Ni Multi-Principal Element Alloy

Low neutron cross-section FeCrVTiNi based high-entropy alloys: design, additive manufacturing and characterization

Microstructural evolution and mechanical behavior of Co‐free (Fe40Ni30Cr20Al10)100‐x Ti x high‐entropy alloys

Effect of Ti on Characterization and Properties of CoCrFeNiTix High Entropy Alloy Prepared Via Electro-Deoxidization of the Metal Oxides and Vacuum Hot Pressing Sintering Process

Controlled Valence Electron Concentration Approach to Tailor the Microstructure and Phase Stability of an Entropy-Enhanced AlCoCrFeNi Alloy

Phase, microstructure and compressive properties of refractory high-entropy alloys CrHfNbTaTi and CrHfMoTaTi