Abstract:A Ti-based bulk metallic glass matrix composite (BMGMC) with a homogeneous distribution of dendrites and the composition of Ti46Zr20V12Cu5Be17 is characterized by a high tensile strength of ∼1640MPa and a large tensile strain of ∼15.5% at room temperature. The present BMGMC exhibits the largest tensile ductility and highest fracture absorption energy under the stress–strain curve of all dendrite-reinforced BMGMCs developed to date. Tensile deformation micromechanisms are explored through experimental visualization and theoretical analyses. After tension, fragmentation of the dendrites, rather than crystallization within the glass matrix and/or atom debonding near the interface of dual-phase composites, is responsible for the high tensile ductility. The subdivisions within the interior of dendrites are separated by shear bands and dense dislocation walls, and local separation of dendrites under modes I and II prevails. The multiplication of dislocations, severe lattice distortions, and even local amorphization dominate within the dendrites. Good structural coherency of the interface is demonstrated, despite being subjected to significant plastic deformation. Theoretical analyses reveal that the constitutive relations elastic–elastic, elastic–plastic, and plastic–plastic of dual-phase BMGMC generally correspond to the (1) elastic, (2) work-hardening, and (3) softening deformation stages, respectively. The capacity for work-hardening is highly dependent on the large plastic deformation of the dendrites and the high yield strength of the glass matrix. The present study provides a fundamental basis for designing work-hardening dual-phase BMGMCs exhibiting remarkably homogeneous deformation.

Microstructure and Deformation Mechanism of Titanium-Based Metallic Glass Matrix Composites

Tensile Deformation Mechanism of an In Situ Formed Ti-Based Bulk Metallic Glass Composites

A Real-Time TEM Study of the Deformation Mechanisms in Β-Ti Reinforced Bulk Metallic Glass Composites

Dynamic Mechanical Behavior of In-situ (ti0.474zr0.34cu0.06be0.126) 100-Xfex (x=0, 2) Bulk Metallic Glass Composites

Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites

Mechanical Properties and Fracture Behaviour of in Situ Dendrite-Intermetallic Ti-based Bulk Metallic Glass Composites

Microstructure Evolution and Mechanical Properties of A Ti-Based Bulk Metallic Glass Composite

Deformation Micromechanisms of a Ti-Based Metallic Glass Composite with Excellent Mechanical Properties

In-situ Tensile Testing of ZrCu-based Metallic Glass Composites

Development of In-Situ Β-Ti Reinforced Be-free Ti–based Bulk Metallic Glass Matrix Composites

Tensile Deformation Micromechanisms for Bulk Metallic Glass Matrix Composites: from Work-Hardening to Softening

Microstructure and Mechanical Properties of Ti48Zr18V12Cu5Be17 Bulk Metallic Glass Composite

Β-Type Ti-based Bulk Metallic Glass Composites with Tailored Structural Metastability

Work-hardenable Zr-based Bulk Metallic Glass Composites Reinforced with Ex-Situ TiNi Fibers

Microstructure Evolution of A Ti-Based Bulk Metallic Glass Composite During Deformation

Strengthening Ti-based Bulk Metallic Glass Composites Containing Phase Transformable Β-Ti Via Al Addition

In Situ TEM Observation of Phase Transformation in Bulk Metallic Glass Composites

Dendritic and spherical crystal reinforced metallic glass matrix composites

Deformation-Induced Martensitic Transformation in Cu-Zr-Zn Bulk Metallic Glass Composites

Preparation, Microstructure, and Mechanical Properties of Bulk Metallic Glass Composite Containing In Situ-Formed Dendrites and Ex Situ Tungsten Particles

Fabrication and Mechanical Characterization of Ti-Based Metallic Glass Matrix Composites by the Bridgman Solidification