Abstract:Metallic glass-reinforced metal matrix composites (MMCs) are in the focus of attention of many research groups due to the outstanding properties provided by a combination of ductile crystalline matrix and high-strength glassy phase. To date, many fabrication techniques have been used to form such composites. Most of them are based on pressure-assisted sintering of glassy and crystalline components. However, the selection of the heating temperature and holding time is challenging due to the low thermal stability of the metallic glasses (MGs). In this study, a solid-state magnetic pulse welding (MPW) technique was used for manufacturing laminated Ti-based composites with Zr-based MG reinforcement. The structure of the interfaces between Ti and MG layers was studied using light microscopy (LM), scanning electron microscopy (SEM), and synchrotron X-ray diffraction (SXRD). The experimental study was supplemented with smoothed-particle hydrodynamics (SPH) numerical simulations. The Ti-MG-Ti composite obtained by MPW possessed high quality of joint and had no macroscopic defects such as cracks or lack of fusion. The formation of a firm joint was provided by the plastic flow of titanium. Deformation processes in the titanium plates developed mainly in the interfacial zones, while the MG ribbons subjected to deformation by shear mechanism through the entire thickness. Due to the short-term thermal impact and high cooling rates, MPW retained a disordered structure of MG, despite local melting occurring at the interfaces and in shear bands. Tensile tests of composites containing 5 vol. % and 13 vol. % of MG phase showed that their strength follows the rule of mixtures.

Compressive deformation and damage of Mg-based metallic glass interpenetrating phase composite containing 30–70 vol% titanium

Microstructure and Deformation Mechanism of Titanium-Based Metallic Glass Matrix Composites

Tensile Deformation Mechanism of an In Situ Formed Ti-Based Bulk Metallic Glass Composites

Compressive Properties and Failure of Aluminum/Epoxy Resin Interpenetrating Phase Composites Reinforced by Glass Fiber

On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures

A damage-tolerant Ti-rich multiphase metallic-glass composite with hierarchically heterogeneous architecture

Tensile properties and damage mechanisms of 3D printed Ti-24Nb-4Zr-8Sn alloy and polyurea interpenetrating phase composites

Cooperative strengthening effect of transformation-induced plasticity and twinning-induced plasticity on strain hardening in a novel metallic glass matrix composite subjected to dynamic compression

Effect of medium-range ordered nanoclusters on compression deformation of Mg65Cu25Y10 metallic glasses

Design Optimization and Mechanical Properties of SiC Particle Reinforced Ti-Based Metallic Glass Matrix Composite

Concurrently achieving strength-ductility combination and robust anti-wear performance in an in-situ high-entropy bulk metallic glass composite

Improved Tensile Ductility by Severe Plastic Deformation for Nano-Structured Metallic Glass.

Heat Treatable Al‐Zn‐Mg‐Cu Matrix Composites Reinforced With Ni‐Based Metallic Glass Powder

Microstructure and mechanical behavior of metallic glass fiber-reinforced Al alloy matrix composites

Structure and mechanical properties of three-layer composites obtained by magnetic pulse welding of titanium and Zr-based metallic glass

Effects of pore diameter and B2-NiTi crystal on plasticity of amorphous Ni-Ti alloy based on molecular dynamics simulation

Modulating the microstructure and mechanical properties of β-Ti-reinforced bulk metallic glass composites by carbon addition

Plasticity-improved Zr–Cu–Al Bulk Metallic Glass Matrix Composites Containing Martensite Phase

Atomistic Investigation of Mechanical Properties of Metallic Glass Nanocomposites

Microstructure and Mechanical Properties of Zr-Based Metallic Glass Composites with Size-Variable Tungsten Reinforcements

Mechanical and corrosion properties of Ti-Ni-Cu-Zr metallic glass matrix composites