Abstract:Transformation-induced plasticity (TRIP)-assisted steels exhibit an excellent combination of strength and ductility due to enhanced strain hardening rate associated with deformation-induced martensitic transformation (DIMT). Quantitative evaluation on the role of DIMT in strain hardening behavior of TRIP-assisted steels and alloys can provide guidance for designing advanced materials with strength and ductility synergy, which is, however, difficult since the phase composition keeps changing and both stress and plastic strain are dynamically partitioned among constituent phases during deformation. In the present study, tensile deformation with in situ neutron diffraction measurement was performed on an Fe-24Ni-0.3C (wt.%) TRIP-assisted austenitic steel. The analysis method based on stress partitioning and phase fractions measured by neutron diffraction was proposed, by which the tensile flow stress and the strain hardening rate of the specimen were resolved into factors associated with each phase, i.e., the austenite matrix, deformation-induced martensite, and the transformation rate of DIMT after differentiation, and then the role of each factor in the global strain hardening behavior was discussed. In addition, the plastic strain partitioning between austenite and martensite was indirectly estimated using the dislocation density measured by diffraction profile analysis, which constructed the full picture of stress and strain partitioning between austenite and martensite in the material. The results suggested that both the transformation rate and the phase stress borne by the deformation-induced martensite played important roles in the global tensile properties of the material. The proposed decomposition analysis method could be widely applied to investigating mechanical behavior of multi-phase alloys exhibiting the TRIP phenomenon.

Cooperative strengthening effect of transformation-induced plasticity and twinning-induced plasticity on strain hardening in a novel metallic glass matrix composite subjected to dynamic compression

Enhanced Mechanical Property of Ti-45551 Alloy Due to TRIP Effect

High-strength and Ductile Glassy-Crystal Ni–Cu–Zr–Ti Composite Exhibiting Stress-Induced Martensitic Transformation

Transformation and twinning induced plasticity in metastable Ti-Mo alloys under high strain rate deformation

Transformation-induced Plasticity in Bulk Metallic Glass Composites Evidenced by In-Situ Neutron Diffraction

Superplasticity and Constitutive Relationship in a Ti-based Metallic Glassy Composite

Deformation Micromechanisms of a Ti-Based Metallic Glass Composite with Excellent Mechanical Properties

Simultaneous Enhancement of Strength and Ductility Through Coordination Deformation and Multi-Stage Transformation Induced Plasticity (TRIP) Effect in Heterogeneous Metastable Austenitic Steel

Ultrahigh strain hardening in a transformation-induced plasticity and twinning-induced plasticity titanium alloy

Enhanced Mechanical Properties by Cyclic Compression in TiNb/Zr-Based Metallic Glassy Composite

Experimental Investigation on a Novel Medium Mn Steel Combining Transformation-Induced Plasticity and Twinning-Induced Plasticity Effects

Revealing the Individual Hardening Effects of Twins, Dislocations, Grain Boundaries and Solid Solution in a Twinning-Induced Plasticity Steel

Strain-rate-dependent Deformation Behavior in a Ti-based Bulk Metallic Glass Composite Upon Dynamic Deformation

Strain Rate Sensitivity and Deformation Behavior in a Ti-based Bulk Metallic Glass Composite

Tensile Deformation Mechanism of an In Situ Formed Ti-Based Bulk Metallic Glass Composites

Quantitatively evaluating respective contribution of austenite and deformation-induced martensite to flow stress, plastic strain, and strain hardening rate in tensile deformed TRIP steel

Martensitic Transformation and Plastic Deformation of TiCuNiZr-Based Bulk Metallic Glass Composites

Versatile Medium Entropy Ti-Based Bulk Metallic Glass Composites

On the Strain Rate Sensitivity of Aluminum-Containing Transformation-Induced Plasticity Steels: Interplay Between TRIP and TWIP Effects

Superior superplasticity and multiple accommodation mechanisms in TiB reinforced near-α titanium matrix composites

A Phenomenon of Strain Induced Bainitic Transformation and Its Effect on Strength Enhancement in a Lightweight Transformation-Induced-plasticity Steel