Abstract:Laminated/bimetal composites can offer the advantage of combining constituent metals, but their heterogeneous microstructures exhibit different mechanical properties during subsequent remanufacturing process than those of the homogeneous counterparts. This study investigated the tensile properties, microstructural evolution and deformation behaviours of a new explosive welded TA1/5083 composite sheet using the in-situ characterisation. It is found that a wavy transition zone forms in the composite sheet, showing gradients in the element diffusion and micro-hardness adjacent to the interface. The slip bands with the tensile direction of 45° primarily occur in the 5083 side (rather than the TA1 side) with an increase in deformation. Although the dislocation density of the grains in the 5083 layer increases significantly, these grains are slightly elongated along the tensile direction without a significant orientation change. Three deformation stages and a subsequent crack initiation stage appear during the in-situ tensile process. The initiation of micro-cracks in the interfacial zone results from the internal stress concentration occurring at the bottom of interfacial wave structure. Once initial micro-cracks evolve into the intermetallic compounds (IMCs) of the interfacial zone, the high magnitude of stress concentrations of the TA1 and 5083 layers leads to necking and sequential fractures. This study can provide a reference for the design of high-quality Ti/Al composite components for industry.

Investigation of the microcrack evolution in a Ti-based bulk metallic glass matrix composite

In Situ TEM Study of Pulse-Enhanced Plasticity of Monatomic Metallic Glasses

Microstructure and Deformation Mechanism of Titanium-Based Metallic Glass Matrix Composites

Tensile Deformation Mechanism of an In Situ Formed Ti-Based Bulk Metallic Glass Composites

Cracking in a Fe–25Mn–3Si–3Al Steel

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Crack tip cavitation in metallic glasses

A tensile deformation model for in-situ dendrite/metallic glass matrix composites

In situ observation of intergranular fracture propagation in nanocrystalline freestanding ultrathin tungsten film

Microstructure and mechanical behavior of metallic glass fiber-reinforced Al alloy matrix composites

Deformation-induced ultrafine grains near fatigue crack tip and correlative fatigue damage in Al matrix composite

Fracture behavior and deformation-induced structure changes of a Ti-based metallic glass using micro-sized cantilevers

In Situ Micromechanical Characterization of Metallic Glass Microwires under Torsional Loading

Spatial–Temporal evolution of shear banding in bulk metallic glasses

Mechanical Properties,Damage and Fracture Mechanisms of Bulk Metallic Glass Materials

An Atomistic Investigation of Structural Evolution in Metallic Glass Matrix Composites

In-situ investigation on tensile properties of a novel Ti/Al composite sheet

Effect of precipitate shape and distribution on mechanical behavior of shape memory metallic glass composites by molecular dynamics method

Atomistic Investigation of Mechanical Properties of Metallic Glass Nanocomposites

An improved tensile deformation model for in-situ dendrite/metallic glass matrix composites

Shear fracture in bulk metallic glass composites