Abstract:The effect of cold-drawing on the tensile property and giant magneto-impedance (GMI) effect of melt-extracted Co-based amorphous microwires was evaluated through detailed analyses of the distribution of residual stress and microstructural evolution. The tensile ductility and tensile strength increased gradually with cross-sectional area reduction ratio (R) until 51%, and decreased with further deformation. The microwire with R=51% exhibits the highest tensile ductility of 1.09% and tensile strength of 4320MPa. Structural and thermodynamic analyses reveal that it is the mechanical deformation rather than thermal activation that induces the precipitation of nanocrystals and arrests the quick extension of shear bands leading to the enhanced ductility. Interestingly, the GMI effect also attains the maximum value of 160% at 10MHz when R=51% (30% larger than that of the as-cast wires), before decreasing with further cold-drawing. Such an identical evolution trend of both tensile and GMI properties can be ascribed to two underlying mechanisms: the generation of longitudinal and circumferential residual stresses and the growth of deformation-induced nanocrystals during cold-drawing. The role of residual stress is established herein not only as a trigger to accelerate the amorphous-to-nanocrystalline phase transformation but also as a decisive contributor to the mechanical and GMI performance. The unique simultaneous improvement of both mechanical and GMI properties of cold-drawn Co-based microwires opens up new possibilities for a variety of engineering applications, such as high-performance magnetic, stress and biological sensors.

In Situ Micromechanical Characterization of Metallic Glass Microwires under Torsional Loading

In Situ SEM Torsion Test of Metallic Glass Microwires Based on Micro Robotic Manipulation

In Situ TEM Study of Pulse-Enhanced Plasticity of Monatomic Metallic Glasses

Tensile Properties and Fracture Reliability of a Glass-Coated Co-based Amorphous Microwire

In Situ Microwave Characterization Of Microwire Composites Under Mechanical Stress

Relating Residual Stress and Microstructure to Mechanical and Giant Magneto-Impedance Properties in Cold-Drawn Co-based Amorphous Microwires

Nanocrystallization Enabled Tensile Ductility of Co-Based Amorphous Microwires

The Shear Band Controlled Deformation in Metallic Glass: A Perspective from Fracture

Novel Magnetic Microwires-Embedded Composites for Structural Health Monitoring Applications

Fracture behavior and deformation-induced structure changes of a Ti-based metallic glass using micro-sized cantilevers

Real-time, high-resolution study of nanocrystallization and fatigue cracking in a cyclically strained metallic glass

Direct in situ observation of metallic glass deformation by real-time nano-scale indentation

Scale effect investigation of copper microwire's mechanical properties after in situ scanning electron microscope twisting

Size Effects on Tensile and Compressive Strengths in Metallic Glass Nanowires

In situ TEM observation of the plastic behavior of bodycentered cubic metal Mo nanowires

Effects of size on the mechanical response of metallic glasses investigated through in situ TEM bending and compression experiments

Evolution of local densities during shear banding in Zr-based metallic glass micropillars

Structural heterogeneity governing deformability of metallic glass

Investigation of the microcrack evolution in a Ti-based bulk metallic glass matrix composite

Initiation and Evolution of Shear Bands in Bulk Metallic Glass under Tension—an in Situ Scanning Electron Microscopy Observation

Crystallization during bending of a Pd-based metallic glass detected by x-ray microscopy