Abstract:Load shedding under cold dwell fatigue in titanium alloys has been a threat to the safety of the aero-engine since it is responsible for crack formation. The strain incompatibility between the soft-hard grain pair arises from the significant creep in the soft grain during the dwell period, which is fundamentally related to the load shedding. Such deformational heterogeneity is not only affected by the soft-hard grain itself but also by its neighboring grains, but the effect of the latter is rarely reported. In this paper, the effect of neighboring grains, including location, crystal orientation, texture, etc., on load shedding is quantitatively investigated using a three-dimensional rate-dependent crystal plasticity model by controlling the microstructural morphology of the grains. In particular, the mechanism that the dwell fatigue cracks tend to nucleate from the sample's interior rather than the free surface is revealed. Restriction of rigid body rotation from neighboring grains can further enhance load shedding. The crystal orientation of individual and group neighboring grains sitting at different locations with respect to the soft-hard grain pair is evaluated. The grain directly attached to the hard grain has the strongest influence. The statistics of load shedding are analyzed by conducting hundreds of simulations with different textures. Stronger textures are found to be able to enhance load shedding and thus deteriorate the service lifetime. The change of locations showing the highest stress during the dwell period arising from plastic deformation in neighboring grain may lead to the phenomenon of reverse load shedding. Understanding the neighboring grain effects from both the mechanistic basis and the statistical point of view is important in integrity evaluations and service life assessments of titanium components in aero-engines.

Deformation-induced ultrafine grains near fatigue crack tip and correlative fatigue damage in Al matrix composite

Deformation in Fatigue Crack Tip Plastic Zone and Its Role in Crack Propagation of Titanium Alloy with Tri-Modal Microstructure

Microstructural correlated damage mechanisms of the high-cycle fatigued in-situ TiB2/Al-Cu-Mg composite

Experimental study of the mechanisms of nanoparticle influencing the fatigue crack growth in an in-situ TiB2/Al-Zn-Mg-Cu composite

Revealing the complex effects of particle bands on fatigue crack growth in an extruded aluminium matrix composite

Effects of stress state, strain rate, and temperature on fracture behavior of in situ TiB2/2024 Al composite

Study on Microscopic Ductile Fracture of In-Situ TiB2/2024 Al Matrix Composite

Study fatigue crack initiation in TiB2/Al-Cu-Mg composite by in-situ SEM and X-ray microtomography

In-situ Observation of Crack Evolution in Ti/Al Laminated Composite

Damage mechanism of TiB;/2024Al composite in high-cyclic fatigue

Fatigue Crack Initiation and Propagation Dominated by Crystallographic Factors in TiB/near α-Ti Composite

Heterogeneous Deformation and Damage Mechanisms in Multi-Phase TA15 Ti-alloy: Insights from Experiments Informed Damage-Crystal Plasticity Modelling

Study fatigue crack initiation in TiB<sub>2</sub>/Al-Cu-Mg composite by <i>in-situ</i> SEM and X-ray microtomography

Revealing the Effect of Oriented Microstructures on the Anisotropy of Fatigue Crack Propagation Behavior in TiB2/Al-Cu-Mg-Mn Composite

Investigation of Neighboring Grain Effects on Load Shedding in Titanium Alloys under Cold Dwell Fatigue

Α-Lamella Orientation Dependence of Fatigue Crack Propagation in As-Forged TiB/near Α-Ti Composite

Enhancing fatigue crack propagation resistance of heterostructured Al composites and multistage crack mechanisms

Fatigue Crack Initiation and Propagation in A356 Alloy Reinforced with in Situ TiB2 Particles

Microstructure evolution and damage mechanism of layered titanium matrix composites under tensile loading

Deformation behavior at fatigue crack tip in nickel-based alloy

The effects of grain morphology and crystallographic orientation on fatigue crack initiation in a metastable titanium alloy Ti-7333