Abstract:In order to reflect the real network composites with a hard phase TiB2 surrounded by a soft phase Cu, a developed large crystal-like cell model which closer to the real cell structure is proposed in this paper. Micro-geometric features of network TiB2/Cu composites are extracted based on the actual SEM, and a stochastic synthesis algorithm is adopted to reconstruct network structure. Based on MATLAB, a 3D network model of TiB2/Cu composites is established through Voronoi algorithm. By using finite element method, the effects of configuration parameters including TiB2 particle wall thicknesses, matrix phase sizes and matrix phase morphology on the deformation and fracture behaviors in network TiB2/Cu composites are investigated, and the mechanical properties of the composites are predicted. Three failure modes including brittle fracture of particle wall, ductile damage of matrix and traction-separation law of interface are introduced in the proposed models. The experimental stress–strain curves were implemented to verify the simulation results. The results show that the trend is in good agreement and the simulation results are stable and reliable. The comprehensive mechanical properties of network composites are assessed by yield strength, elastic modulus, elongation and tensile strength. The equivalent stress and stress concentration factor of the particle wall, brittle fracture process of network, interfacial debonding, crack damage and equivalent plastic strain of matrix are quantitatively presented. It is illustrated that the bearing capacity of network TiB2/Cu composites is determined by Cu matrix, TiB2 particle wall and interface. A macro and micro structure-properties relationship of network configuration composites is established in this paper. This work provided reference and guidance for the configuration design of the network composites in the experiment.

Microstructure evolution and damage mechanism of layered titanium matrix composites under tensile loading

Room temperature tensile fracture characteristics of in situ TiBw/Ti6Al4V composites with a quasi-continuous network architecture

Enhancing Ductility of Titanium Matrix Composites by Multimodal Α-Grains

Numerical modeling and failure evolution of microstructure-based in-situ TiB2 and TiC+TiB2 reinforced Cu matrix composites

Deformation-induced ultrafine grains near fatigue crack tip and correlative fatigue damage in Al matrix composite

Temperature-dependent reversed fracture behavior of multilayered TiBw/Ti–Ti(Al) composites

Multiplied bending ductility and toughness of titanium matrix composites by laminated structure manipulation

Effects of configuration parameters on the deformation and fracture behaviors of TiB2/Cu composites with network structure: A numerical approach using an enhanced finite element model

Layer structure-based grain refinement mechanism and its effect on the mechanical behavior of Ti/Al laminated metal composites

On the deformation and fracture of a bone-like structure titanium

Strain rate sensitivity of titanium matrix composites: In the presence of laminated structure

Mechanical properties and microstructure of a Si3N4/Ti3SiC2 multilayer composite

Microstructure and Mechanical Properties of Ti-Al-Ti-Ti2AlNb Laminated Composites Based on the Ductile-brittle Structure

A multiscale elastoplastic tensive behavior of quasi-continuous network structured (Ti 3 AlC 2 -Al3Ti)/2024Al composite

Interface regulation effects on mechanical behavior of heterostructure Ti6Al4V/TiAl-based laminated composite sheets

Design a Ti6Al4Vâ€“Ti43Al9V laminated composite with high strength and fracture toughness

Towards strength-ductility enhancement of titanium matrix composites through heterogeneous grain structured Ti matrix design

Configuration of new fiber-like structure driven high matching of strength-ductility in TiB reinforced titanium matrix composites

Hot deformation, processing maps, and microstructural evolution of Ti/Ni/Ti layered composites

Effects of three stress levels on the fatigue properties and fracture mechanisms of an in-situ synthesized TiB/Ti-6Al-4V titanium matrix composite

Effect of Al2Cu constituent layer thickness discrepancy on the tensile mechanical behavior of Cu/Al2Cu/Al layered composites: A molecular dynamics simulation