Abstract:Background A dosimeter with high spatial and temporal resolution would be of significant interest for pencil beam scanning (PBS) proton beams' characterization, especially when facing small fields and beams with high temporal dynamics. Optical imaging of scintillators has potential in providing sub‐millimeter spatial resolution with pulse‐by‐pulse basis temporal resolution when the imaging system is capable of operating in synchrony with the beam‐producing accelerator. Purpose We demonstrate the feasibility of imaging PBS proton beams as they pass through a plastic scintillator detector to simultaneously obtain multiple beam parameters, including proton range, pencil beam's widths at different depths, spot's size, and spot's position on a pulse‐by‐pulse basis with sub‐millimeter resolution. Materials and methods A PBS synchrocyclotron was used for proton irradiation. A BC‐408 plastic scintillator block with 30 × 30 × 5 cm3 size, and another block with 30 × 30 × 0.5 cm3 size, positioned in an optically sealed housing, were used sequentially to measure the proton range, and spot size/location, respectively. A high‐speed complementary metal‐oxide‐semiconductor (CMOS) camera system synchronized with the accelerator's pulses through a gating module was used for imaging. Scintillation images, captured with the camera directly facing the 5‐cm‐thick scintillator, were corrected for background (BG), and ionization quenching of the scintillator to obtain the proton range. Spots' position and size were obtained from scintillation images of the 0.5‐cm‐thick scintillator when a 45° mirror was used to reflect the scintillation light toward the camera. Results Scintillation images with 0.16 mm/pixel resolution corresponding to all proton pulses were captured. Pulse‐by‐pulse analysis showed that variations of the range, spots' position, and size were within ± 0.2% standard deviation of their average values. The absolute ranges were within ± 1 mm of their expected values. The average spot‐positions were mostly within ± 0.8 mm and spots' sigma agreed within 0.2 mm of the expected values. Conclusion Scintillation‐imaging PBS beams with high‐spatiotemporal resolution is feasible and may help in efficient and cost‐effective acceptance testing and commissioning of existing and even emerging technologies such as FLASH, grid, mini‐beams, and so forth.

A High Performance Scintillator Ion Beam Monitor

Beam instrumentation system development and commissioning in ssrf

Development of fiber beam loss monitor based on Cerenkov principle

High spatiotemporal resolution scintillation imaging of pulsed pencil beam scanning proton beams produced by a gantry‐mounted synchrocyclotron

A prototype scintillating fibre beam profile monitor for Ion Therapy beams

Characterization and performances of a monitoring ionization chamber dedicated to IBA-universal irradiation head for Pencil Beam Scanning

4H-Silicon Carbide as particle detector for high-intensity ion beams

A Prototype Scintillator Real-Time Beam Monitor for Ultra-high Dose Rate Radiotherapy

A Beam Monitor for Ion Beam Therapy Based on HV-CMOS Pixel Detectors

The XBPF, a new multipurpose scintillating fibre monitor for the measurement of secondary beams at CERN

Geometrical Characterization of an Inorganic Scintillator Detector for Proton Therapy Using a Micrometer-Scale Ion Beam

A fast plastic scintillator for low intensity proton beam monitoring

SiC Based Beam Monitoring System for Particle Rates from kHz to GHz

Initial Evaluation of the Performance of Novel Inorganic Scintillating Detectors for Small Animal Irradiation Dosimetry

The Ionization Profile Monitors in the Recycler Ring

A Multi-Layer Strip Ionization Chamber (MLSIC) Device for Proton Pencil Beam Scan Quality Assurance.

Ionization Profile Monitors for the IOTA Proton Beam

Ultra-fast, high spatial resolution single-pulse scintillation imaging of synchrocyclotron pencil beam scanning proton delivery

Silicon carbide detectors for dosimetry and monitoring of ultra-high dose rate beams