Abstract:In recent years, rubber toughened polypropylene (PP) blends have been extensively investigated with special regard to the importance of PP matrix properties (e.g., crystal morphology and structure) in tailoring the toughening efficiency. Unfortunately, although high melt flowability is indispensable to the processing of polymers into complex thin-wall products, it remains a huge challenge to achieve a marvelous balance between stiffness and toughness in the blends with relatively low matrix molecular weight. Herein, taking PP/EPR (ethylene-propylene copolymer) blends as an example, the combined effects of matrix molecular weight and crystallinity on the mechanical properties of PP/EPR blends have been examined in both experiment and theory. The experimental results show that decreasing molecular weight leads to significant deterioration in notched impact toughness, tensile strength and Young's modulus. Impressively, the toughness loss caused by the decrease of molecular weight can be well-compensated by a slight reduction in the matrix crystallinity, without evidently sacrificing the strength and modulus, demonstrating an improved stiffness-toughness balance. Theoretical analysis indicates that the impact toughness of PP/EPR blends is heavily dependent on the chain entanglement density (v e ) of PP matrix, and a linear relationship between critical interparticle distance (ID c ) and the v e 1/3 has been verified from both experiment and theory. Moreover, it is interesting to find that decreasing matrix crystallinity can increase the v e of low-molecular-weight PP matrix, which enables the effective toughening at lower concentration of EPR and thus gives rise to less loss in the strength and modulus. We believe this work not only gives a new insight into the role of chain entanglement in the toughening but also provides a promising guidance for the design of high-performance PP with high melt flowability.

Effect of polypropylene molecular weight distribution on the balance between the toughness and rigidity of the impact polypropylene composites

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

Regulation of Structure and Mechanical Properties of Poly(propylene-Butene) Alloys by Monomer Composition Switching

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Studies of the Toughness and Reinforcement of PP/Magnesium Hydrate Whisker/POE Composites

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Design of high impact thermal plastic polymer composites with balanced toughness and rigidity: Effect of matrix polymer molecular weight

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Combined effects of matrix molecular weight and crystallinity on the impact toughness of PP/EPR blends: The role of chain entanglement

Study on Toughening Mechanism of Low Molecular Weight PC/PP Blend

Brittle Ductile Transition of POE Toughened HDPE and Its Lowest Rigidity Loss: Effect of HDPE Molecular Weight

Toughening of PBT by POE/POE-g-GMA Elastomer Through Regulating Interfacial Adhesion and Toughening Mechanism

Polypropylene toughened with ethylene-n-butyl acrylate-carbon monoxide terpolymer: structure–property relationship

Toughened Polypropylene Random Copolymer with Olefin Block Copolymer

Simultaneously enhancing strength and toughness for impact polypropylene copolymers by regulating the dispersed phase with high density polyethylene

Toughening Polypropylene by Tiny Amounts of Fillers

Fabrication and toughening mechanism of high toughness PP/SEBS/HDPE blends with core‐shell particles

Synergistic Improvement of Toughness of Isotactic Polypropylene: the Introduction of High Density Polyethylene and Annealing Treatment

Brittle-tough transition in PP/EPDM blends: effects of interparticle distance and temperature

Chain microstructure of two in-reactor alloy impact polypropylene resins with same stiffness and different toughness