Abstract:The heterogeneous nucleation process of polypropylene (PP)/high density polyethylene (HDPE)/thermoplastic elastomer (POE) composites was realized through blending modification, and characterization techniques, including scanning electron microscopy, differential scanning calorimetry, X-ray diffraction, and dynamic mechanical analysis, were used to analyze the pattern of the impact of modified dicyclohexyl-terephthalamide (TMB-5) on the mechanical properties and thermal stability of the PP/HDPE/POE composites. The results indicated that the modified TMB-5 was advantageous to the improvement of the mechanical properties and thermal stability of the high-temperature (cooking temperature)-resistant PP/HDPE/POE composites. When the amount of added modified TMB-5 was 0.4%, the impact strength and tensile strength of the PP/HDPE/POE composites increased to 36.3 kJ/m 2 and 31.7 MPa, respectively, which were, respectively, 99.5% and 8.5% higher than those of the materials prepared when the amount of added modified TMB was 0.1%. The materials had higher storage modulus in room-temperature and high-temperature environments: 2,438.2 MPa (room temperature), 1,103.9 MPa (120°C), and 1,054.8 MPa (140°C). In addition, the capability of the PP/HDPE/POE composites to crystallize was improved continuously, and the crystallinity increased considerably. At the same time, the crystallization and melting temperatures increased, β-crystal formation was induced, and glass transition temperature increased, thus effectively improving the mechanical properties and thermal stability of the high-temperature (cooking temperature)-resistant PP/HDPE/POE composites.

Studies of the Toughness and Reinforcement of PP/Magnesium Hydrate Whisker/POE Composites

Research on Toughening Modification of Copolymerized Polypropylene Using Polyolefin Elastomers

Fracture behavior and deformation mechanism of polypropylene/ethylene-octene copolymer/magnesium hydroxide ternary phase composites

Preparation of Magnesium Hydroxide Sulfate Whisker-Phenolic Resin Composite by In-Situ Polymerization Technique and Its Properties

Polyolefin Composites Filled with Magnesium Hydroxide

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

Simultaneously Improving The Toughness, Flexural Modulus And Thermal Performance Of Isotactic Polypropylene By Alpha-Beta Crystalline Transition And Inorganic Whisker Reinforcement

Mechanical Properties and Microstructure of the HDPE/Al(OH)3/POE Composite

Effect of polypropylene molecular weight distribution on the balance between the toughness and rigidity of the impact polypropylene composites

Magnetic polypropylene composites with selectively localized reactive nano-Fe3O4 in toughener of POE-g-MAH: Towards super toughness, high flexibility and balanced strength

Study on Mechanical Properties and Thermal Stability of Polypropylene/hemp Fiber Composites

The Dielectric and Mechanical Properties of A Potassium-Titanate-Whisker-Reinforced Pp/Pa Blend

Mechanical properties and thermal stability of high-temperature (cooking temperature)-resistant PP/HDPE/POE composites

Mechanical Properties and Flame-Retardant of PP/MRP/Mg(OH)2/Al(OH)3 Composites

Study on Morphology and Properties of PP/EOC Blends

Mechanical properties and flame retardancy of surface modified magnesium oxysulfate (5Mg(OH)2·MgSO4·3H2O) whisker for polypropylene composites

Toughness mechanism in polypropylene composites: Polypropylene toughened with elastomer and calcium carbonate

Fabrication and toughening mechanism of high toughness PP/SEBS/HDPE blends with core‐shell particles

TOUGHENING OF POLYLACTIDE BY MELT BLENDING WITH POLYETHYLENE-OCTENE COPOLYMER

Toughening and reinforcing wood flour/polypropylene composites with high molecular weight polyethylene under elongation flow

The Properties and Morphologies of Composites Based on Sulfated EPDM Ionomer Toughed Polypropylene Highly Filled with Mg(OH)2