Abstract:In this study, we propose a novel approach to toughening polypropylene (PP) by integrating in-situ fibrillation technology with the silane crosslinking mechanism. Specifically, we graft vinyl trimethoxy silane (VTMS) onto the backbone of ethylene-butene-rubber (EBR) chains using reactive extrusion . Subsequently, we perform the in-situ fibrillation process using a spunbond machine, resulting in PP composites with in-situ nano-fibrillated EBR-g-VTMS. The next step involves crosslinking the fibrillated EBR-g-VTMS using moisture in order to preserve the fibrillar morphology. The unique fibrillar morphology and the substantial interfacial area of the rubber phase significantly enhance the mechanical, rheological, and crystallization behavior of the PP composites. Rheological data reveal that the in-situ nano-fibrillated rubber phase forms an interconnected network at around 3 wt% loading. Scanning Electron Microscopy (SEM) images show that the average EBR-g-VTMS fiber size is approximately 70–80 nm at 10 wt% rubber loading. Notably, the presence of fibrillar EBR-g-VTMS leads to a substantial increase in β phase content up to ∼65 %. Moreover, the matrix-spanning network of cross-linked EBR fibers exhibits toughening mechanisms superior to those found in classical sea-island blends, resulting in a dramatic enhancement of PP toughness across various test conditions (such as 50 % in the elongation at break in room temperature, 300 % in sub-zero tensile testing , and 200 % in Izod impact test) while showing only marginal reduction around 10 % in its strength and stiffness. Finally, this innovative and practical approach enables the leveraging of in-situ fibrillation for a wide range of polymer/rubber systems, optimizing rubber performance as a toughening agent.

Highly toughened PP/Rice husk charcoal composites modified Ethylene Propylene Diene Monomer (EPDM) with glycidyl methacrylate

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

Toughness Enhancement of Poly(lactic Acid), Bamboo Particle and Ultrafine Bamboo-Char Ternary Biocomposites by Polyethylene Glycol Plasticization

Preparation of PBT/POE‐g‐GMA/PP Ternary Blends with Good Rigidity–toughness Balance by Core–shell Particles

Crystallization behaviours regulations and thermostability enhancement strategy of polypropylene composites modified by dispersed rice husk charcoal

Toughening with Little Rigidity Loss and Mechanism for Modified Polypropylene by Polymer Particles with Core–shell Structure

Study of Dynamically Cured PP/MAH-g-EPDM/epoxy Blends

Fabrication and toughening mechanism of high toughness PP/SEBS/HDPE blends with core‐shell particles

Transform Rice Husk and Recycled Polyethylene into High Performance Composites: Using a Novel Compatibilizer to Infiltratively Enhance the Interfacial Interactions

The Properties and Morphologies of Composites Based on Sulfated EPDM Ionomer Toughed Polypropylene Highly Filled with Mg(OH)2

The Cellular Structure and Mechanical Properties of Polypropylene/Nano-CaCO3/Ethylene-propylene-diene-monomer Composites Prepared by an In-Mold-Decoration/Microcellular-Injection-Molding Process

Studies of polypropylene modified by waste of PMMA/ABS/UPR multilayer plates

Carbon Fiber Reinforced Recycled Polypropylene/Polyolefin Elastomer Composites with High Mechanical Properties

Toughening and reinforcing wood flour/polypropylene composites with high molecular weight polyethylene under elongation flow

Toughening Polypropylene by Tiny Amounts of Fillers

Mechanical Properties and Morphologies of Polypropylene Composites Synergistically Reinforced-Toughened by Styrene–butadiene Rubber and Graphene Oxide Nanosheets

Toughening of Poly(ethylene Terephthalate) and Optimizing of the Compatibilization Between PET and EPDM by Functionalized EPDM

Fabricating super-tough polypropylene nanocomposites incorporating silane cross-linked in-situ nano-fibrillated ethylene-1-butene copolymer

Fabrication Of Polypropylene Blends With Excellent Low-Temperature Toughness And Balanced Toughness-Rigidity By A Combination Of Epr And Seeps

Study on Mechanical Properties and Thermal Stability of Polypropylene/hemp Fiber Composites

Highly toughened poly(lactic acid) blends prepared by reactive blending with a renewable poly(ether‐block‐amide) elastomer