Abstract:3,4,5‐trichlorobenzoic acid is first reported as the anode interfacial layer material, which can be facilely processed by air‐blading (without annealing) and in situ self‐assembly. Organic photovoltaics devices based on PM6: BTP‐eC9 achieve an impressively high efficiency of 18.8% with in situ self‐assembled 3,4,5‐trichlorobenzoic acid anode interfacial layer, representing the highest value among devices with in situ self‐assembly anode interfacial layer. Future industrialization of organic photovoltaics (OPVs) requires OPVs' processing to be more energy‐efficient and streamlined. Currently, only MoO3 and PEDOT:PSS are commonly used as the anode interface layer (AIL). The processing of MoO3 typically involves vacuum thermal evaporation with stringent thickness requirements. PEDOT:PSS necessitates separate processing and thermal annealing at temperatures exceeding 100 °C to eliminate moisture. This work utilized 3,4,5‐trichlorobenzoic acid (3CBA) as the AIL material. The distinct advantage of 3CBA over PEDOT:PSS and MoO3 is the in situ self‐assembly of 3CBA eliminates the need for separate solution processing, thermal evaporation, or thermal annealing. Remarkably, OPV devices incorporating PM6, BTP‐eC9, and the 3CBA AIL exhibited a superior efficiency of 18.2% compared to those with PEDOT:PSS (17.7%). By using nonhalogenated solvent, o‐xylene, to meet industrialization requirements, the devices achieved an exceptional efficiency of 18.8%, the highest reported value among devices with in situ self‐assembled interface layers. Furthermore, semi‐transparent devices with 3CBA displayed higher PCE and AVT values (13.1% and 25.7%) than their PEDOT: PSS counterparts, due to the weak absorption of the 3CBA AIL. This work contributes significantly to the high‐throughput production of OPVs by streamlining the AIL processing.

Ambipolar-transport wide-bandgap perovskite interlayer for organic photovoltaics with over 18% efficiency

Over 18.8% Efficiency of Layer‐By‐Layer Organic Photovoltaics Enabled by Ameliorating Exciton Utilization in Acceptor Layer

In Situ Self‐Assembly of Trichlorobenzoic Acid Enabling Organic Photovoltaics with Approaching 19% Efficiency

Nonconjugated Polymer Poly(vinylpyrrolidone) As an Efficient Interlayer Promoting Electron Transport for Perovskite Solar Cells.

Layer‐by‐Layer Processed Ternary Organic Photovoltaics with Efficiency over 18%

Bipolar Pseudohalide Ammonium Salts Bridged Perovskite Buried Interface toward Efficient Indoor Photovoltaics

Efficient semitransparent layer‐by‐layer organic photovoltaics via optimizing wide bandgap and narrow absorption polymer layer thickness

An Interfacial Material with Low Trap Density Enables Efficient Organic Photovoltaic Cells for Multi‐Scene Applications

Versatile Self‐Assembled Monolayer Material Enables Efficient Organic Photovoltaic Devices and Modules

Coordinating light management and advance metal nitride interlayer enables MAPbI3 solar cells with >21.8% efficiency

Copper phosphotungstate as low cost, solution-processed, stable inorganic anode interfacial material enables organic photovoltaics with over 18% efficiency

Over 19.2% efficiency of layer-by-layer organic photovoltaics enabled by a highly crystalline material as an energy donor and nucleating agent

Wide-bandgap MAPbBr 3 perovskite solar cells using bifunctional-molecule additives achieving a high open-circuit voltage of 1.63 V

Zwitterion Coordination Induced Highly Orientational Order of CH 3 NH 3 PbI 3 Perovskite Film Delivers a High Open Circuit Voltage Exceeding 1.2 V

High-performance FAPbBr3 Perovskite Solar Cells Using Dual-Function Bathocuproine Interlayer for Surface Passivation and Energy Level Alignment

Engineering the Hole Extraction Interface Enables Single‐Crystal MAPbI 3 Perovskite Solar Cells with Efficiency Exceeding 22% and Superior Indoor Response

Efficient and Stable Large Bandgap MAPbBr<sub>3</sub> Perovskite Solar Cell Attaining an Open Circuit Voltage of 1.65 V

16.7%-efficiency ternary blended organic photovoltaic cells with PCBM as the acceptor additive to increase the open-circuit voltage and phase purity

Organic-inorganic Halide Perovskite Solar Cell with CH3NH3PbI2Br As Hole Conductor

Pushing the Envelope: Achieving an Open‐Circuit Voltage of 1.18 V for Unalloyed MAPbI3 Perovskite Solar Cells of a Planar Architecture

Transparent Hole‐Transporting Frameworks: A Unique Strategy to Design High‐Performance Semitransparent Organic Photovoltaics