Abstract:A novel design for providing a high field based on a semi-open split Nb-Ti superconducting magnet has been developed. It is to incorporate in the versatile multi-field test facility established for professional tests of field-dependent and mechanical behaviors of low-temperature and high-temperature superconducting wires and tapes. The semi-open split superconducting magnet (the peak magnetic field in the coil up to 7.8 T) is a good candidate to generate a transverse field in a large work region of Ø100 mm × H800 mm. On the other hand, its semi-open shaped configuration for samples makes it feasible for a non-contact optical technology of digital image correlation (DIC) for being utilized in full-field deformation measurements under extreme conditions. Since the irregular-shaped configuration and large deformation due to attraction; mechanical behavior of support structures of the magnet will be crucial for its stability and operation function. In this study, an internal reinforced cantilever structure for splitting the superconducting magnet poles was proposed to bear the large attraction from Lorentz forces and keep a stable configuration under operation conditions. Analysis based on a finite element method was performed to obtain deformation and stress profiles of the superconducting coil windings and reinforced cantilever structure with contact nonlinearity. The effect of geometrical parameters of the cantilever on axial displacements in the split magnet system was addressed. Experiments on excitation and quench of the assembled split superconducting magnet were performed at 4.2 K to capture strain responses. The numerical predictions showed reasonable agreements with the observations on structural stress/strain states. It indicated that an optimization analysis of the cantilever structure is necessary for a high-field irregular-shaped magnet system for its assembly and excitation.

Mechanical Design of a Nb3Sn Superconducting Magnet System for a 45 GHz ECR Ion Source

Mechanical Design of the Half-length Prototype for a Superconducting FECR Ion Source

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source

Mechanical Analysis and Measurements of a Multicomponent NbTi/Cu Superconducting Magnets Structure for the Fully Superconducting Electron Cyclotron Resonance Ion Source

Optimum Design of the Magnetic Mirror Structure for Testing Nb3Sn Sextupole Coil

Test of a Prototype Nb3Sn Sextupole Coil for 45-Ghz ECR Ion Source Using Mirror Structure

Electromagnetic Design and Mechanical Analysis of a 13-T Superconducting Magnet for Neutron Scattering Sample Experiments

A Superconducting Magnet with Center Field of 10 T and Φ100 Mm Warm Bore

Design of a 15 T Hybrid Superconducting Magnet

Structural design and test of superconducting magnet coil for the cooling storage ring external-target experiment

Distributed Real-Time Strain Monitoring for Nb3Sn Sextupole Superconducting Magnets: from Assembly to Excitation

Mechanical Responses of a Semi-Open Split Nb–Ti Superconducting Magnet Reinforced with Cantilever Structure

High Magnetic Field Superconducting Magnet for 400 MHz Nuclear Magnetic Resonance Spectrometer

Stable Acceleration of a LHe-Free Nb3Sn demo SRF e-linac Based on Conduction Cooling

Quench Analysis and Experiments on Nb3Sn Superconducting Magnet Half-Length Prototype

Design, Development and Fabrication for BESIII Superconducting Muon Detector Solenoid

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

Development Of Nb3sn Superconducting Coil Manufacture Technology

Design and Fabrication of a Cross-Warm-Bore Split-Gap Superconducting Magnet System

Mechanical Design and Testing of the Magnet Mirror Structure for Dummy Coil of a Superconducting FECR Ion Source

Structural Design of a 9.4 T Whole-Body MRI Superconducting Magnet