Abstract:In pursuit of a fourth-generation electron cyclotron resonance (ECR) source, a powerful Nb3Sn superconducting magnet system employing a sextupole-in-solenoid configuration has been recently developed at the Institute of Modern Physics (IMP) in Lanzhou, China. These superconducting magnets operate under extreme conditions, experiencing high magnetic fields, cryogenic temperatures, and mechanical stresses. Understanding their stress/strain behaviors, therefore, is of utmost importance to ensure reliable operation and optimal performance. However, the conventional single-point strain gauges commonly exhibit certain limitations that pose challenges in measuring global strain within complex and larger structures. The presence of substantial electromagnetic interference further exacerbates the difficulty in obtaining accurate strain measurements. To address these challenges, a novel approach was undertaken in this study to develop a distributed real-time strain monitoring system specifically designed for the sextupole superconducting magnets, which is based on optical frequency domain reflectometry (OFDR) combined with high spatial resolution distributed optical fiber technology. The strain profile and evolution of the magnets system have been comprehensively monitored throughout the entire operational process, including assembly, cooling down, excitation, and quenching stages. Consequently, valuable insights into the global strain characteristics of the superconducting magnets have been attained, revealing intriguing features such as asymmetrical distribution and extreme values. The development of this distributed real-time strain monitoring system represents a notable advancement in the field of superconducting magnet technology.

Optimum Design of the Magnetic Mirror Structure for Testing Nb3Sn Sextupole Coil

Mechanical Design and Testing of the Magnet Mirror Structure for Dummy Coil of a Superconducting FECR Ion Source

Test of a Prototype Nb3Sn Sextupole Coil for 45-Ghz ECR Ion Source Using Mirror Structure

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source

Mechanical Design of the Half-length Prototype for a Superconducting FECR Ion Source

Design and Assembly of a Large-aperture Nb3Sn Cos-theta Dipole Coil with Stress Management in Dipole Mirror Configuration

Mechanical Analysis and Measurements of a Multicomponent NbTi/Cu Superconducting Magnets Structure for the Fully Superconducting Electron Cyclotron Resonance Ion Source

Development Of Nb3sn Superconducting Coil Manufacture Technology

MOGA Optimization of Superconducting Longitudinal Gradient Bend Based on NbTi Wire

The cryogenic experiment for the Nb3Sn CICC model coil and the analysis of its strain test results

Winding Design for CFETR Central Solenoid Model Coil

Distributed Real-Time Strain Monitoring for Nb3Sn Sextupole Superconducting Magnets: from Assembly to Excitation

Structural design and test of superconducting magnet coil for the cooling storage ring external-target experiment

Winding R&D for CFETR Central Solenoid Model Coil

Structure parametric optimization and mechanical analysis of the MSe1 septum magnet

Structure Design and Analysis of Canted-Cosine-Theta (CCT) Superconducting Quadrupole Magnet

Development of a 120-mm Aperture Nb3Sn Dipole Coil with Stress Management

Electromagnetic design study of a superconducting longitudinal gradient bend magnet based on the HALF storage ring

Design, Development and Fabrication for BESIII Superconducting Muon Detector Solenoid

Design of a Superconducting Gantry Dipole Magnet Based on Tilted Solenoids

Insert Magnet and Shim Coils Design for a 27 T Nuclear Magnetic Resonance Spectrometer with Hybrid High and Low Temperature Superconductors