Abstract:R&D of high field accelerator magnets is ongoing at the Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS) for pre-study of the next-generation high energy colliders like Super Proton-Proton Collider (SPPC), Future Circular Collider (FCC) and etc. A 12.47-T main field at 4.2 K has been attained in 2021 within two 14-mm apertures of LPF1-U, a superconducting model dipole magnet with Nb 3 Sn & NbTi combined common-coil configuration. Based on the experiences mastered in the LPF1 series magnets, a 16-T high field dipole magnet named LPF3 has been designed, fabricated and is in the performance test process. LPF3 is also a combined magnet with six racetrack Nb 3 Sn coils outside, expected to provide a 13-T main field within two 50-mm apertures, and with inserted HTS coils to enhance the field up to 16 T or even higher. The 13-T Nb 3 Sn dipole magnet, named LPF3-LTS, incorporates a graded common-coil configuration to enhance superconductor efficiency. The optimization of coil layouts includes varying bending radii (BR) and lengths of straight sections (LSS) to mitigate field accumulation in the outer four coils near the central posts and coil ends, respectively. Several Rutherford cables over 200 meters were fabricated for the coils winding, and with the maximum strands count of 42. The support structure for LPF3-LTS has adopted a shell-based design, with an improved “Bladder & Key” technology. Dedicated hydraulic pistons were investigated and utilized to replace the traditional bladders. The main design characteristics, fabrication process and some preliminary test results of the magnet are presented in this paper.

Test of a Prototype Nb3Sn Sextupole Coil for 45-Ghz ECR Ion Source Using Mirror Structure

Development of a 1/2-length prototype high field Nb3Sn magnet for the 4th generation ECR ion source

Prospect for a 60 GHz multicharged ECR ion source

Design and Test of A Short Mockup Magnet for the Superconducting Undulator at the Ssrf

Design and Assembly of a Large-aperture Nb3Sn Cos-theta Dipole Coil with Stress Management in Dipole Mirror Configuration

Design and Test of Superconducting Magnet for 200 MeV Proton Cyclotron

Structural design and test of superconducting magnet coil for the cooling storage ring external-target experiment

Design and Testing of a Prototype Canted-Cosine-Theta HTS Dipole Magnet Using CORC Cable

Fabrication and cold test of prototype of spatially periodic radio frequency quadrupole focusing linac

High Magnetic Field Superconducting Magnet for 400 MHz Nuclear Magnetic Resonance Spectrometer

Models and experimental results from the wide aperture Nb-Ti magnets for the LHC upgrade

Fabrication and Test of Nb3Sn-NbTi Superconducting Joint for a 14-T MRI Magnet

Development of short prototype of dual aperture quadrupole magnet for CEPC ring

Design of a CW BISOL RFQ for Three Kinds of High-Charge-State Ions Simultaneous Acceleration

Test of a 1.8 Tesla, 400 Hz Dipole for a Muon Synchrotron

Development and Test of a Large-aperture Nb3Sn Cos-theta Dipole Coil with Stress Management

First-Cut Design of a Benchtop Cryogen-Free 23.5-T/25-mm Magnet for 1-GHz Microcoil NMR

Design and Fabrication of a 13-T Twin-Aperture Superconducting Dipole Magnet with Graded Common-Coil Configuration

The first superconducting final focus quadrupole prototype of the FCC-ee study

Design of a large-scale superconducting dipole magnet for the CEE spectrometer

Electromagnetic, stress and thermal analysis of the Superconducting Magnet