Abstract:R&D of high field accelerator magnets is ongoing at the Institute of High Energy Physics, Chinese Academy of Sciences (IHEP, CAS) for pre-study of the next-generation high energy colliders like Super Proton-Proton Collider (SPPC), Future Circular Collider (FCC) and etc. A 12.47-T main field at 4.2 K has been attained in 2021 within two 14-mm apertures of LPF1-U, a superconducting model dipole magnet with Nb 3 Sn & NbTi combined common-coil configuration. Based on the experiences mastered in the LPF1 series magnets, a 16-T high field dipole magnet named LPF3 has been designed, fabricated and is in the performance test process. LPF3 is also a combined magnet with six racetrack Nb 3 Sn coils outside, expected to provide a 13-T main field within two 50-mm apertures, and with inserted HTS coils to enhance the field up to 16 T or even higher. The 13-T Nb 3 Sn dipole magnet, named LPF3-LTS, incorporates a graded common-coil configuration to enhance superconductor efficiency. The optimization of coil layouts includes varying bending radii (BR) and lengths of straight sections (LSS) to mitigate field accumulation in the outer four coils near the central posts and coil ends, respectively. Several Rutherford cables over 200 meters were fabricated for the coils winding, and with the maximum strands count of 42. The support structure for LPF3-LTS has adopted a shell-based design, with an improved “Bladder & Key” technology. Dedicated hydraulic pistons were investigated and utilized to replace the traditional bladders. The main design characteristics, fabrication process and some preliminary test results of the magnet are presented in this paper.

Electromagnetic Design and Mechanical Analysis of a 13-T Superconducting Magnet for Neutron Scattering Sample Experiments

Insert Magnet and Shim Coils Design for a 27 T Nuclear Magnetic Resonance Spectrometer with Hybrid High and Low Temperature Superconductors

A Superconducting Magnet with Center Field of 10 T and Φ100 Mm Warm Bore

Mechanical Design of the Half-length Prototype for a Superconducting FECR Ion Source

High Magnetic Field Superconducting Magnet for 400 MHz Nuclear Magnetic Resonance Spectrometer

Mechanical Design, Assembly and Strain Measurement Results of a 13-T Superconducting Dipole Magnet

Preliminary Mechanical Analysis of a 9.4-T Whole-Body MRI Magnet

Design and Electromagnetic-thermal-mechanical Analysis of a 13-Tesla Combined Magnet

Design and Fabrication of a 13-T Twin-Aperture Superconducting Dipole Magnet with Graded Common-Coil Configuration

Structural Design of a 9.4 T Whole-Body MRI Superconducting Magnet

Electromagnetic, stress and thermal analysis of the Superconducting Magnet

Numerical analysis on the mechanical behavior of a 5T superconducting magnet

High Magnetic Field Superconducting Magnet with Zero Helium Boil-Off for Nuclear Magnetic Resonance Spectrometer

Electromagnetic Design of a 16–9 T High Field Double Superconducting Magnets System for Nuclear Demagnetization Refrigerator

Development of a Superconducting Magnet for High Magnetic Force Application

Mechanical Analysis and Measurements of a Multicomponent NbTi/Cu Superconducting Magnets Structure for the Fully Superconducting Electron Cyclotron Resonance Ion Source

Thermo-mechanical Analysis of the Structure Components of 15 T Magnet in Super-X Facility

Design of a 15 T Hybrid Superconducting Magnet

Structural design and test of superconducting magnet coil for the cooling storage ring external-target experiment

Electromagnetic Design Of Hts Insert For Ultrahigh Field Nmr Magnet

Design of Superconducting Magnet for Background Magnetic Field