Abstract:Abstract We investigated the effect of film thickness (geometrical confinement) on the structural evolution of sputtered indium-zinc-tin oxide (IZTO) films as high mobility n-channel semiconducting layers during post-treatment at different annealing temperatures ranging from 350 to 700 °C. Different thicknesses result in IZTO films containing versatile phases, such as amorphous, low-, and high-crystalline structures even after annealing at 700 °C. A 19-nm-thick IZTO film clearly showed a phase transformation from initially amorphous to polycrystalline bixbyite structures, while the ultra-thin film (5 nm) still maintained an amorphous phase. Transistors including amorphous and low crystalline IZTO films fabricated at 350 and 700 °C show reasonable carrier mobility ( μ FE ) and on/off current ratio ( I ON/OFF ) values of 22.4–35.9 cm 2 V −1 s −1 and 1.0–4.0 × 10 8 , respectively. However, their device instabilities against positive/negative gate bias stresses (PBS/NBS) are unacceptable, originating from unsaturated bonding and disordered sites in the metal oxide films. In contrast, the 19-nm-thick annealed IZTO films included highly-crystalline, 2D spherulitic crystallites and fewer grain boundaries. These films show the highest μ FE value of 39.2 cm 2 V −1 s −1 in the transistor as well as an excellent I ON/OFF value of 9.7 × 10 8 . Simultaneously, the PBS/NBS stability of the resulting transistor is significantly improved under the same stress condition. This promising superior performance is attributed to the crystallization-induced lattice ordering, as determined by highly-crystalline structures and the associated formation of discrete donor levels (~ 0.31 eV) below the conduction band edge.

Thermopower modulation analyses of effective channel thickness for Zn-incorporated In2O3-based thin-film transistors

Thermopower Modulation Analyses of High-Mobility Transparent Amorphous Oxide Semiconductor Thin-Film Transistors

Influence of the Channel Layer Thickness on Electrical Properties of Indium Zinc Oxide Thin-Film Transistor

High-mobility and high-reliability Zn-incorporated amorphous In2O3-based thin-film transistors

Quantum Confinement Effect in Amorphous In–Ga–Zn–O Heterojunction Channels for Thin-Film Transistors

Effect of the Active Channel Thickness Variation in Amorphous In-Zn-Sn-O Thin Film Transistor

Amorphous indium zinc oxide thin film transistors with poly-4-vinylphenol gate dielectric layers

P‐5.4: Processing Effects on the Performances of Indium Zinc Bismuth Oxide Thin Film Transistors

Electrical Properties of Amorphous Indium Zinc Tin Oxide Thin Film Transistor with Y₂O₃ Gate Dielectric

Channel thickness effect on the performance of amorphous SiZnSnO semiconductor thin-film transistor with metal capping structure

Amorphous InGaZnO Thin-Film Transistors With Sub-10-nm Channel Thickness and Ultrascaled Channel Length

Boosting carrier mobility and stability in indium–zinc–tin oxide thin-film transistors through controlled crystallization

Influence of Temperature on the Illumination Time Dependent Photocurrent of Amorphous InZnO Thin-Film Transistors

The Influence of Channel Layer Thickness on the Electrical Properties of Zno Tfts

Gate Insulator Influences on the Electrical Performance of Back-Channel-Etch Amorphous Zinc Tin Oxide (A-Zto) Thin Film Transistors

Physical Insight Into Multiple Gate-Voltage Dependencies of Off-State Photocurrent in Amorphous InZnO Thin-Film Transistors

Impact of layer thickness on the operating characteristics of In2O3/ZnO heterojunction thin-film transistors

Effects of channel thickness on characteristics of HZO-TFTs fabricated at low temperature

Effects of low‐temperature thermal annealing on interface characteristics in IZO/IGZO dual‐channel thin‐film transistors

Annealing Effect on Amorphous Indium-Zinc-Tungsten-Oxide Thin-Film Transistors