Abstract:In this study, C/C–SiC and C/C–SiC–ZrC composites were prepared via chemical vapor infiltration and polymer infiltration pyrolysis, and the ablation mechanism under hypersonic oxygen-rich environmental conditions was investigated. The C/C–SiC composites demonstrate an excellent ablation resistance in a hypersonic oxygen-rich environment with a relatively low temperature and speed of approximately 1800 K and 1100 m/s, respectively. It is only in the ablation center area with higher temperatures that a certain degree of thermochemical ablation was observed. The mass and linear ablation rates of C/C–SiC composites (0.027 g/s and 0.117 mm/s, respectively) showed a significant increase in a hypersonic oxygen-rich environment with a temperature and velocity of approximately 2050 K and 2000 m/s, respectively. The high-temperature ablation resistance of ZrC-modified C/C–SiC–ZrC composites improved significantly. However, the ZrC ceramic component had a considerable impact on the ablation resistance of the material. The structural integrity of C/C–20SiC–30ZrC composites was relatively high in hypersonic oxygen-rich environments with a jet temperature and velocity of 2050 K and 2000 m/s, respectively, and mass and linear ablation rates were 0.012 g/s and 0.015 mm/s, respectively. When the ZrC content increased by 40%, the ablation resistance of the composite reduced significantly, whereas the mass and linear ablation rates increased to 0.043 g/s and 0.130 mm/s, respectively.

Ablation behavior of C/C-ZrC-SiC composite with gradient distribution of ZrC-SiC ceramics along the thickness

Ablation Behaviors and Mechanism of ZrC-SiC-Si/SiC-Si Double-Layered Coatings on C/C Composite under Plasma Flame at 3000 °C

Microstructure and Ablation Property of Gradient ZrC SiC Modified C/C Composites Prepared by Chemical Liquid Vapor Deposition

Preparation and long-term ablation behavior of Cf-reinforced ZrC-SiC coated C/C-ZrC-SiC composite

One-step Preparation and Ablation Behavior of ZrC-SiC-Si Coating for Nose-Shaped ZrC/C Composites with Gradient Pore Structure by Vapor Silicon Infiltration

Local Anti-Ablation Modification of Uneven-Density C/C Composites with the ZrC-SiC Composite Ceramics

Ablation resistance of ZrC/SiC gradient coating for SiC-coated carbon/carbon composites prepared by supersonic plasma spraying

Ablation Behavior of ZrC–SiC Coated C/C–ZrC–SiC Composites Prepared by Precursor Infiltration Pyrolysis Combined with Reactive Melt Infiltration

The Ablation Behavior and Mechanical Property of C/C-SiC-ZrB2 Composites Fabricated by Reactive Melt Infiltration

Ablation Performances of Multi-Phased C/C-Zrc-Sic Ultra-High Temperature Composites

Construction of Gradient Structure C/C-ZrC-SiC Composites with Good Ablation Resistance

Ablation and Heat Insulation Performances of Nose-Shaped ZrC-C Composites with Gradient Pore Structure

Enhanced Anti-Ablation Performance of Carbon/carbon Composites Modified with ZrC-SiC

Preparation, Ablation Behavior and Mechanism of C/C-ZrC-SiC and C/C-SiC Composites

Microstructure and Ablation Behaviors of A Novel Gradient C/C-Zrc-Sic Composite Fabricated by an Improved Reactive Melt Infiltration

Ablation of advanced C/C-ZrC-SiC leading edge composites

Ablation mechanism of C/C–SiC and C/C–SiC–ZrC composites in hypersonic oxygen-enriched environment

Effect of Temperature Gradient on the Ablation and Flexural Behavior of C/C-ZrC Composites

Ablation Behavior of a C/C-ZrC-SiC Composite Based on High-Solid-loading Slurry Impregnation under Oxyacetylene Torch

Ablation Behavior and Mechanism of C/C–ZrC–SiC Composites under an Oxyacetylene Torch at 3000°C

Effect of ZrC–SiC Content on Microstructure and Ablation Properties of C/C Composites