Abstract:First-principles calculations based on density functional theory (DFT) have been performed to explore the effects of Si, Cr, W, and Nb elements on the stability, mechanical properties, and electronic structures of MoAlB ternary boride. The five crystals, with the formulas of Mo4Al4B4, Mo4Al3SiB4, Mo3CrAl4B4, Mo3WAl4B4, and Mo3NbAl4B4, have been respectively established. All the calculated crystals are thermodynamically stable, according to the negative cohesive energy and formation enthalpy. By the calculation of elastic constants, the mechanical moduli and ductility evolutions of MoAlB with elemental doping can be further estimated, with the aid of B/G and Poisson's ratios. Si and W doping cannot only enhance the Young's modulus of MoAlB, but also improve the ductility to some degree. Simultaneously, the elastic moduli of MoAlB are supposed to become more isotropic after Si and W addition. However, Cr and Nb doping plays a negative role in ameliorating the mechanical properties. Through the analysis of electronic structures and chemical bonding, the evolutions of chemical bondings can be disclosed with the addition of dopant. The enhancement of B-B, Al/Si-B, and Al/Si-Mo bondings takes place after Si substitution, and W addition apparently intensifies the bonding with B and Al. In this case, the strengthening of chemical bonding after Si and W doping exactly accounts for the improvement of mechanical properties of MoAlB. Additionally, Si doping can also improve the Debye temperature and melting point of the MoAlB crystal. Overall, Si element is predicted to be the optimized dopant to ameliorate the mechanical properties of MoAlB.

Structural study of crystalline and amorphous phases of Si0.65Ge0.35B (x = 0, 0.01, 0.05, 0.10) alloy prepared by long-time mechanical alloying

Effects of boron content on the structure and magnetic properties of Fe81-xSi13BxMo2Cr1Cu1P2 nanocrystalline alloys

Silicon Doping Effect on the Crystallization Behavior of Ge2Sb2Te5 Film

Boron in Polycrystalline Si X Ge1 − X Films: Phase Diagram and Solid Solubility

Low-temperature Annealing of Polycrystalline Si/sub 1-X/ge/sub X/ after Dopant Implantation

Effects of Doped Elements (Si, Cr, W and Nb) on the Stability, Mechanical Properties and Electronic Structures of MoAlB Phase by the First-Principles Calculation

The Alloying Effects of Ge and Si on Thermal Stability and Crystallization Behavior of Al-Y Binary Amorphous Alloys

Locating Si Atoms in Si-doped Boron Carbide: A Route to Understand Amorphization Mitigation Mechanism

Boron in Polycrystalline Sixge1-X Films

Boron‐dependent Microstructural Evolution, Thermal Stability, and Crystallization of Mechanical Alloying Derived SiBCN

Role of boron addition on phase composition, microstructural evolution and mechanical properties of nanocrystalline SiBCN monoliths

Synthesis Mechanism of Amorphous Si2BC3N Powders: Structural Evolution of 2si‐bn‐3c Mixtures During Mechanical Alloying

Lattice constants and optical response of pseudomorph Si-rich SiGe:B

Microstructure and mechanical properties of Si micro-alloyed (Ti28Zr40Al20Nb12)100-xSix (x=0, 0.1, 0.2, 0.5) high entropy alloys

Tuning superconductivity in nanosecond laser annealed boron doped $Si_{1-x}Ge_{x}$ epilayers

Optical Properties of Ge40Sb10Te50Bx (x = 0–2) Films

Structural and microstructural characterization of SiB0.5C 1.5N0.8Al0.3 powders prepared by mechanical alloying using aluminum nitride as aluminum source

First principles study on the phase stability and mechanical properties of MoSi2 alloyed with Al, Mg and Ge

First Principle Calculations of Iron and Iron-Boron Transition Levels in Si1−x Ge X Alloy

Strain and Electrical Characterization of Boron-Doped Sigec Layers Grown by Chemical Vapor Deposition

Structural, Electronic, and Optical Properties of Ordered Si1−Ge C Alloys: A First Principles Study