Abstract:In this article, the long-lasting antifogging capability of large-aperture optical components was obtained by the in-situ plasma treatment. Water contact angle and surface free energy were used to study the overall antifogging evolution of optical components in the air. The optical performance, including laser-induced damage threshold and surface morphology, were discussed after plasma cleaning. Elements contents and functional groups information were analyzed by X-ray photoelectron spectroscopy detection as a reference to simulation results. In molecule dynamics simulations, the substrates of fused quartz were modified by linking various functional groups (-H, –OH, –CHO, –COOH, –NH2) to simulate the surface of optical components after plasma treatment at a microscopic level. Experimental results showed that the surface of the optical components (fused quartz, sol-gel antireflection film, multilayer dielectric film) treated by plasma had a good antifogging effect, which can be maintained for 300 min. The surface wettability of optical components was improved significantly after plasma treatment, which was supported mainly by the polar components in the surface free energy. Besides, The optical performance of the components was enhanced while the surface structure was barely damaged. According to simulation results, it was found that –CHO, –COOH, and –NH2 played a dominant role in improving the hydrophilicity of optical components, compared with -H, –OH. The hydrophilic surfaces after plasma modification were obtained because more hydrogen bonds were generated between the surface functional groups and the water molecules. The above research provides a new method and a theoretical basis for improving the long-lasting antifogging for large-aperture optical components.

In situ plasma cleaning of large-aperture optical components in ICF

Traceless Mitigation of Laser Damage Precursors on a Fused Silica Surface by Combining Reactive Ion Beam Etching with Dynamic Chemical Etching

Long-lasting antifogging mechanism for large-aperture optical surface in low-pressure air plasma in-situ treated

Mechanism and Reactive Species in a Fountain-Strip DBD Plasma for Degrading Perfluorooctanoic Acid (PFOA)

In-Situ Cleaning of Carbon-Contaminated Optical Components in Beam-Line of Synchrotron Radiation Light Source

Microscopic Chemical Reaction Mechanism of Carbon Contaminants on the Surface of Pulse-compressed Gratings Cleaned by Low-pressure Plasma

In-Flight Dry Etching of Plasma-Synthesized Silicon Nanocrystals

Removal of Particle Contaminations on Sol-Gel Coated Fused Silica Surface by Laser Cleaning

Characterization of Carbon-Contaminated B4C-Coated Optics after Chemically Selective Cleaning with Low-Pressure RF Plasma

RF plasma cleaning of optical surfaces: A study of cleaning rates on different carbon allotropes as a function of RF powers and distances

Towards in-situ cleaning of a trapped ion quantum computer

Investigation of electrode-driven hydrogen plasma method for in situ cleaning of tin-based contamination

Plasma Cleaning of LCLS-II-HE verification cryomodule cavities

Study of Form Control Algorithm in Atmospheric Pressure Plasma Processing

Glow discharge-optical emission spectroscopy for in situ analysis of surfaces in plasmas

Optimization of cleaning technique for mitigating particulate contamination upon final optics assemblies

Plasma assisted remediation of SiC surfaces

Cleaning of nitrogen-containing carbon contamination by atmospheric pressure plasma jet

In-situ non-destructive removal of tin particles by low-energy plasma for imitation of EUV optical mirrors self-cleaning

Visualization of In Situ Oxidation Process Between Plasma and Liquid Phase in Two Dielectric Barrier Discharge Plasma Reactors Using Planar Laser Induced Fluorescence Technique

Towards chemically neutral carbon cleaning processes: Plasma cleaning of Ni, Rh, and Al reflective optical coatings and thin Al filters for Free Electron Lasers and synchrotron beamline applications