Abstract:Superconducting Radio Frequency (SRF) cavities performance preservation is crucial, from vertical test to accelerator operation. Field Emission (FE) is still one of the performance limiting factors to overcome and plasma cleaning has been proven successful by the Spallation Neutron Source (SNS), in cleaning field emitters and increasing the work function of Nb. A collaboration has been established between Fermi National Accelerator Laboratory (FNAL), SLAC National Accelerator Laboratory and Oak Ridge National Laboratory (ORNL) with the purpose of applying plasma processing to the Linac Coherent Light Source-II (LCLS-II) cavities, in order to minimize and overcome field emission without affecting the high Q of nitrogen-doped cavities. The cleaning for LCLS-II will follow the same plasma composition adopted at SNS, which allows in-situ processing of cavities installed in cryomodules from hydrocarbon contaminants. A novel method for plasma ignition has been developed at FNAL: a plasma glow discharge is ignited using high order modes to overcome limitations imposed by the fundamental power coupler, allowing in-situ cleaning for cavities in cryomodule. The plasma can be easily ignited and tuned in each of the cavity cells using low RF power. A method for plasma detection has been developed as well, which allows the detection of the plasma location in the cavity without the need of cameras at both cavity ends. The presented method can be applied to other multi-cell cavity designs, even for accelerators where the coupling for the fundamental modes at room temperature is very weak.

Plasma Cleaning of LCLS-II-HE verification cryomodule cavities

Low RF power plasma ignition and detection for in-situ cleaning of 1.3 GHz 9-cell cavities

In Situ Plasma Processing of Superconducting Cavities at Jefferson Lab

Experiment Research on Feasibility of In-Situ Plasma Cleaning in Normal-conducting Copper Cavities

Plasma Processing of Large Curved Surfaces for SRF Cavity Modification

Cryogenic rf test of the first plasma etched SRF cavity

Multipacting Processing in Cryomodules For LCLS-II And LCLS-II-HE

Development of a plasma simulation tool for accelerating cavities

In situ plasma cleaning of large-aperture optical components in ICF

Applying the plasma physical sputtering process to SRF cavity treatment: Simulation and Experiment Study

Operational Experience from LCLS-II Cryomodule Testing

Apparatus and method for plasma processing of SRF cavities

Characterization of Carbon-Contaminated B4C-Coated Optics after Chemically Selective Cleaning with Low-Pressure RF Plasma

Plasma Cleaning of Contaminated Optical Components of Synchrotron Radiation Beam-Line

Cleaning of nitrogen-containing carbon contamination by atmospheric pressure plasma jet

Towards chemically neutral carbon cleaning processes: Plasma cleaning of Ni, Rh, and Al reflective optical coatings and thin Al filters for Free Electron Lasers and synchrotron beamline applications

Plasma assisted remediation of SiC surfaces

High duty factor plasma generator for CERN's Superconducting Proton Linac

Critical Exploration of Liquid Metal Plasma-Facing Components in a Fusion Nuclear Science Facility

Towards in-situ cleaning of a trapped ion quantum computer

Fermilab experience of post-annealing losses in SRF niobium cavities due to furnace contamination and the ways to its mitigation: a pathway to processing simplification and quality factor improvement