Abstract:The prevention of hot cracking formation is of utmost importance in the production of the new Ni-Co based superalloys through the utilization of the electron beam smelting layered solidification technique (EBSL), as it ensures exceptional homogeneity and dependable consistency of the specimens. In contrast to previous studies that focused on minimizing the liquid film and solidification range, our methodology adopts a distinct approach. In this research, a novel methodology was employed to mitigate internal stresses through the implementation of equiaxed grain layers via an alternately reduced cooling method. This ultimately resulted in the elimination of hot cracking. To be more specific, the transition from a columnar to an equiaxed structure was observed during the layer-by-layer construction process in the fabrication of the new Ni-Co based superalloy in EBSL. The EBSL-Ni-Co superalloy, when subjected to the alternating reduction cooling method, exhibited an internal stress of 49 MPa. This value represents a significant reduction of 83.8% compared to the internal stress observed when employing the linear reduction cooling method. Additionally, the solvus temperature of the gamma - gamma ' eutectic phases in EBSL-Ni-Co superalloys produced by the alternating reduction cooling method is significantly higher. Intriguingly, the N th layer of the EBSL-Ni-Co based superalloys produced by EBSL simultaneously heats treated with the preceding layers. And the low melting point phase gradually dissolved back into the matrix. The implementation of an alternating reduced cooling method successfully mitigated the formation of the liquid film in the gamma - gamma ' eutectic phase and the buildup of internal stresses in the EBSL-Ni-Co superalloy during its manufacturing process. These discoveries open up a novel preparation procedure pathway for the manufacture of crack-free superalloys with superior mechanical characteristics using EBSL. (c) 2023 Published by Elsevier Ltd on behalf of The editorial office of Journal of Materials Science & Technology.

An analysis of the high-homogeneity preparation, thermo-mechanical deformation and recrystallization behavior of a novel superalloy with γ′ content reaching 73%

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

In-situ Study of Microstructure and Mechanical Properties of GH3536 Alloy Manufactured by Selective Laser Melting at 750 °C

Hot Deformation Behavior of a Powder Metallurgy Superalloy with High γ′ Content

A novel short-process manufacturing method of γ′-strengthened superalloy: Modulation of nano-scaled γ′ precipitates during hot deformation

Deformation and recrystallization behavior of the new Ni-Co based superalloy ingot material prepared by electron beam smelting layered solidification

Solidification Segregation Behavior and Homogenization Process of a Difficult-to-Deform Superalloy Used at 850 °C

Hot Deformation Characteristics and Dynamic Recrystallization Mechanisms of a Novel Nickel‐Based Superalloy

Study on High Temperature Mechanical Behavior and Microstructure Evolution of Ni3Al-based Superalloy JG4246A

Microstructure Control and Hot Cracking Behavior of the New Ni-Co Based Superalloy Prepared by Electron Beam Smelting Layered Solidification Technology

Experimental Investigations and Constitutive Modeling of the Dynamic Recrystallization Behavior of a Novel GH4720Li Superalloys with Yttrium Micro-Alloying

Microstructure evolution and mechanical properties of a novel γ′ phase-strengthened Ir-W-Al-Th superalloy

Processing, Microstructures and Mechanical Properties of a Ni-Based Single Crystal Superalloy

Microstructure, mechanical properties and strengthening mechanisms of IN738LC alloy produced by Electron Beam Selective Melting

Effect of the Powder Size Distribution on the Hot Deformation Behavior of a Novel Nickel-based Powder Metallurgy Superalloy

Temperature-Dependent Mechanical Behaviors and Deformation Mechanisms in a Si-Added Medium-Entropy Superalloy with L12 Precipitation

Thermal processing behaviour and microstructural evolution of high W and high γ' content extruded nickel-based powder metallurgy superalloy FGH4109

Microstructure and Microsegregation in A Ni-Based Single Crystal Superalloy Directionally Solidified under High Thermal Gradient

Influence Mechanism of Slow Cooling Treatment after Homogenization on Hot Deformation Behavior of a New Nickel-Based Superalloy

High Temperature Deformation Behavior and Microstructure Evolution of Wrought Nickel-Based Superalloy GH4037 in Solid and Semi-Solid States