Abstract:β-solidified γ-TiAl alloys are popular lightweight structural materials well suited for high temperature applications, however, whose service temperature limit is greatly restricted due to the insufficient high temperature strength and creep resistance. In present work, a hybrid reinforced β-solidified γ-TiAl alloy was successfully developed with the hybrid addition of C and Y2O3 by induction skull melting (ISM) technique, accordingly, the microstructure, high temperature tensile and creep properties of the alloy are detailly discussed. The results indicate that the hybrid addition of C and Y2O3 can improve the high temperature tensile strength of this nearly lamellar TiAl alloy with the increase of about 13.7%. More importantly, creep resistance of this alloy is significantly enhanced, which is attributed to multiple strengthening mechanisms: (ⅰ) the second phase strengthening from multi-scale Y2O3 particles and dynamically precipitated H–Ti2AlC carbides; (ⅱ) mechanical twins and twin intersections can act as special obstacles to dislocation movement, which is of great significance in decreasing the steady-state creep rate. Particularly, this alloy exhibits excellent microstructure stability during creep. On the one hand, nano-scale Y2O3 and dynamically precipitated H–Ti2AlC particles could pin the B2/γ interface to strengthen lamellar colony boundary. On the other hand, dispersed B2 phase particles could precipitate along α2 lamellae and grow up with the consumption of the α2 phase, which will inhibit the degradation of α2/γ lamellae. This study offers a new composition design approach to optimize high temperature performance of β-solidified γ-TiAl alloys.

Microstructure evolution and mechanical properties of a novel γ′ phase-strengthened Ir-W-Al-Th superalloy

Microstructure and Mechanical Properties of a New Ni-Cr-Fe-W-Al Alloy for Advanced Ultra-Supercritical Power Plants

Microstructures and Mechanical Properties of a L12-structured Precipitation Strengthened Co-based Superalloy

An ultra-high temperature Pt-15Ir-3Hf-0.5Y alloy with high hardness and tensile strength achieved by hot rolling and ageing treatment

Investigation on the Microstructural Evolution and Precipitation Hardening Mechanism of 1cr15ni36w3ti Superalloy with Varied C Contents

Microstructure Evolution and Mechanical Properties of Ultra-Fine Grain AlCrFe2Ni2Wx High-Entropy Alloys

Phase equilibria, microstructure, and high temperature oxidation resistance of novel refractory high-entropy alloys

An analysis of the high-homogeneity preparation, thermo-mechanical deformation and recrystallization behavior of a novel superalloy with γ′ content reaching 73%

Enhanced High Temperature Tensile and Creep Properties of a Β-Solidified Γ-Tial Alloy with the Hybrid Addition of C and Y2O3

Microstructural Evolution and Mechanical Properties of Cast Al-3li-1.5cu-0.2zr Alloy During Heat Treatment

P phase precipitation and strengthening behavior of a novel polycrystalline Ni 3 Al-based intermetallic alloy at 1100 °C

Microstructure and mechanical properties of a new Ni–Co based superalloy at intermediate temperatures

Microstructure and Mechanical Properties of Novel Ti-Al- Mn- W Alloy

Microstructure, Mechanical Properties, Hot Deformation and Oxidation Behavior of Ti–45Al–5.4V–3.6Nb–0.3Y Alloy

Avoiding microstructural instabilities in high tungsten containing superalloys by adjusting Al content

Stability of Microstructure and Mechanical Properties of A Ni-Based Superalloy for Advanced Ultra-Supercritical Fossil Power

Thermal Stability of GH4065A Superalloy Based on Microstructural and Performance Evolution Following Long-Term Aging

Effects of Long Term Thermal Exposure on Microstructure and Mechanical Property Evolution of a New Wrought Ni–Fe Based Superalloy

Microstructures and Mechanical Properties of a Newly Developed Austenitic Heat Resistant Steel

Microstructure and Tensile Behavior of Nickel-Based Single Crystal Superalloys with Different Re Contents

High-strength Co–Al–V-base superalloys strengthened by γ′-Co3(Al,V) with high solvus temperature